72 clutch anti-rattle spring location
Thread Starter
Intermediate
Joined: May 2023
Posts: 25
Likes: 6
72 clutch anti-rattle spring location
Rebuilt the clutch linkage on my 72 SB manual and cannot figure out where the rear anti-rattle spring on the horizontal link between the bellcrank and the clutch fork connects. Front one is easy, but the rear spring is the issue. I see the ring on the linkage itself for one end, but cannot figure out where/how it connects to the clutch fork. Don't see a hole in the fork, and the AIM isn't very clear. Don't see a hole in the clevis pin, either, and cannot believe that it hooks into the eye of the cotter pin?
Thanks!
Thanks!
Le Mans Master
Joined: Mar 2004
Posts: 7,502
Likes: 1,509
From: Little Rock AR
One spring end goes from the bellcrank to the firewall near the steering column. Look for the tiny hole in the flange.
the fork does have a hole. Just need to look again.
the fork does have a hole. Just need to look again.
Last edited by stingr69; Today at 09:49 AM.
