When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Any member out there willing to help me install a ported throttle body? I thought I could handle it after watching the YouTube video but this looks way more complicated. One of the bolts looks nigh impossible to reach and I'm leery of those 2 tubes leading into the intake.
Much appreciated.
If I were closer I could swing by and help ya out with it, I'm in eastern NC. Those hoses in the intake are just vent hoses. you aren't going to damage them. Looks like a Vararam intake on the car. Did you install that yourself? If so, its far more challenging to do. I still have the stock intake but dropped it and swapped out to a ported thottle body in about 15-20 minutes max from start to finish on my '16. Just pull the 4 bolts, unplug it, plug new one in, make sure gasket is still in the groove on the intake side and install and tighten the bolts back down.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.
Need Help in Chapel Hill, NC
