DFW Mod Day?
Racer
Joined: Jun 2009
Posts: 333
Likes: 0
Ohhh, i'm in. In plano as well. I'll be doing a clutch install 
just kidding. Any of you guys have an air compressor? Would like to port match my ls6 intake at a mod day. Also, got an hptuners if anyone needs scanning done
just kidding. Any of you guys have an air compressor? Would like to port match my ls6 intake at a mod day. Also, got an hptuners if anyone needs scanning done
Last edited by froman; Aug 17, 2009 at 12:18 AM.
Racer
Joined: Apr 2009
Posts: 466
Likes: 1
From: plano texas
Instructor
Joined: Jul 2009
Posts: 164
Likes: 0
From: Ft. Worth, The Lone Star State
Best idea I heard in awhile Alex,
I could've used some help installing my veraram (taken less time with necessary tools), did it myself though.
I would like to try the anti-venom mod and see if it works well with my stock shifter.
If ya'll need a place to work on, I can offer my my house/garage as well, and some ice-cold brews
I could've used some help installing my veraram (taken less time with necessary tools), did it myself though.
I would like to try the anti-venom mod and see if it works well with my stock shifter.
If ya'll need a place to work on, I can offer my my house/garage as well, and some ice-cold brews
Instructor
Joined: Jul 2009
Posts: 164
Likes: 0
From: Ft. Worth, The Lone Star State
It'll be a drive for you though
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Tech Contributor
Joined: Jan 2004
Posts: 20,030
Likes: 289
From: Wylie TX --> Less is More, except under the hood !
It helped reduce that feeling.Also I found it helped make my shifting feel not as stiff. I liked the improvement and it helped when I installed the B&M shifter later.
Toque
Racer
Joined: Jun 2009
Posts: 333
Likes: 0
i live right by jupiter and bush.
also, whenever this happens i'll be sure to bring some pucks and my lowpro jack and my hptuners. If any of you guys have put a remote clutch bleeder on without dropping the trans i could REALLY use your help.
also, whenever this happens i'll be sure to bring some pucks and my lowpro jack and my hptuners. If any of you guys have put a remote clutch bleeder on without dropping the trans i could REALLY use your help.
Instructor
Joined: Jul 2009
Posts: 164
Likes: 0
From: Ft. Worth, The Lone Star State
I did the Anti venom mod. A little bit of a pain reaching up to get to it in my garage for sure. I found that it helped free up the shifter between shifts. Its hard to explain kinda. When your shifting from gear to gear, it was not a perfectly smooth shift. Once you hit the neutral position the shifter felt like it paused there for a sec, then would slide into the gear you wanted. I don't think I'm describing this very well... It helped reduce that feeling.
Also I found it helped make my shifting feel not as stiff. I liked the improvement and it helped when I installed the B&M shifter later.
Toque
It helped reduce that feeling.Also I found it helped make my shifting feel not as stiff. I liked the improvement and it helped when I installed the B&M shifter later.
Toque
but if u think it impoves things, then im curious as well, and would like to do this mod as well. would you mind helping me??
Ill bring some brews
Last edited by Surfman2006; Aug 20, 2009 at 01:22 PM.
Tech Contributor
Joined: Jan 2004
Posts: 20,030
Likes: 289
From: Wylie TX --> Less is More, except under the hood !
)... Its super easy though, just remove a bolt and install the anti venom bolt. Its just a pain to get to it though. The higher the car is lifted, the easier it is. I heard that some folks just get a washer to add to the bolt. I'm not sure what sizes they are using though. You might want to do some research on that.
Toque
Instructor
Joined: Jul 2009
Posts: 164
Likes: 0
From: Ft. Worth, The Lone Star State
Sure.... when the mod location is set up and the time I can try to make it. I'll have to check with my boss though (wife)...
Its super easy though, just remove a bolt and install the anti venom bolt. Its just a pain to get to it though. The higher the car is lifted, the easier it is. I heard that some folks just get a washer to add to the bolt. I'm not sure what sizes they are using though. You might want to do some research on that.
Toque
)... Its super easy though, just remove a bolt and install the anti venom bolt. Its just a pain to get to it though. The higher the car is lifted, the easier it is. I heard that some folks just get a washer to add to the bolt. I'm not sure what sizes they are using though. You might want to do some research on that.
Toque
My boss is cool, so, if more people wanna show up, fine with us. I can fire up the grill after a lond day of modding haha
you guys bring the beer, ill provide the meat
