Engine/Trans Shop Recommendations Please
Thread Starter
Melting Slicks
Joined: Dec 2004
Posts: 2,943
Likes: 14
From: Gurley (Keel Mtn, Sweet Home) Alabama
Engine/Trans Shop Recommendations Please
Hi All, looking for a little help/guidance for a repair shop in the Houston area.
The work I need completed is for my 1990 Indy Beretta, 3.1L, M21 5-Speed trans, approx 90K on the clock. Easy miles, never was abused. I know for sure the transmission needs to be pulled and rebuilt. Also replace the clutch, throw-out bearing while working in that area.
Condition of the engine remains to be figured out.
The vehicle hasn't been started in 15 years, give or take, but the good news is it was driven in to the storage facility and periodically checked to see it was still alive.
If you know of a shop that you trust and has a good reputation I'd be obliged to get that information from you. Likewise if you know of a good mechanic who sidelines in such repairs I would be okay with that as well.
Please PM me if you can be of any assistance. Much appreciation from this end.
The work I need completed is for my 1990 Indy Beretta, 3.1L, M21 5-Speed trans, approx 90K on the clock. Easy miles, never was abused. I know for sure the transmission needs to be pulled and rebuilt. Also replace the clutch, throw-out bearing while working in that area.
Condition of the engine remains to be figured out.
The vehicle hasn't been started in 15 years, give or take, but the good news is it was driven in to the storage facility and periodically checked to see it was still alive.
If you know of a shop that you trust and has a good reputation I'd be obliged to get that information from you. Likewise if you know of a good mechanic who sidelines in such repairs I would be okay with that as well.
Please PM me if you can be of any assistance. Much appreciation from this end.
Safety Car
Joined: Nov 2010
Posts: 3,725
Likes: 84
From: Woodlands (houston) TX
Race Director
Joined: May 2012
Posts: 15,766
Likes: 3,283
From: Phoenix area, AZ
Safety Car
Joined: Nov 2010
Posts: 3,725
Likes: 84
From: Woodlands (houston) TX
Thread Starter
Melting Slicks
Joined: Dec 2004
Posts: 2,943
Likes: 14
From: Gurley (Keel Mtn, Sweet Home) Alabama
Thanks for the responses.
No, the Beretta is certainly not high performance. But when restored, it'll make a nice ride for her.
Anyway, back on topic, I need an engine/transmission shop to take care of the motor & trans for me. That is where I'm starting.
ttt
No, the Beretta is certainly not high performance. But when restored, it'll make a nice ride for her.
Anyway, back on topic, I need an engine/transmission shop to take care of the motor & trans for me. That is where I'm starting.
ttt
