When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Are the print files for these still available somewhere?
Originally Posted by Tusc
I have killed or lost several of these over time. Worse, I have cracked out the bottom of the console in one case. Don't fret. It can be fixed with epoxy and a washer. But now you can also print your own replacement covers.
The link for these is broken, does anyone have the files (or know where to find them)? Thanks!
I have the file but I can't PM you since you're so new, so shoot me an email and I'll send you the file in the morning. If all else fails, I may be able to upload it to some site and then post the link here again.
Thanks very much! I can't seem to find a way to message you directly without having enough posts, so my email address is cfolmes@gmail.com. Thanks again!
Door panel screw covers laid down tonight. I think I’ll need to find a darker purple to better match the car, but it’s a great start to making her *mine*
Thanks very much! I can't seem to find a way to message you directly without having enough posts, so my email address is cfolmes@gmail.com. Thanks again!
Thank you. I’m planning on little touches like this to update the interior look to my personal liking, and pull some purple inside too. Having trouble finding a purple stitched steering wheel
Here's something I've been tinkering with, and finally have a result that works well. It's a "plug" that fits in the stock cup holder well with a slot for your phone. You'll need to pop out the cover first, which can easily be done with a flat blade screwdriver. Works great for my phone, and holds securely even with some spirited driving! I'm no genius when it comes to 3D modelling, so if you have any suggestions or want to modify it to suit your purposes, feel free!
Are the print files for these still available somewhere?
