CorvetteForum - Chevrolet Corvette Forum Discussion
0 2019/08/31 08:49:52
0 2019/08/31 08:50:00
0 2020/03/01 14:57:35
0 2020/03/01 14:57:50
There’s one stud missing, not broken off, and I will put a new one in before selling. It probably unscrewed out of the manifold instead of the nut coming off of it, and I probably even have it somewhere, but who knows where.
There’s one stud missing, not broken off, and I will put a new one in before selling. It probably unscrewed out of the manifold instead of the nut coming off of it, and I probably even have it somewhere, but who knows where.
0 2020/03/01 14:58:11
0 2020/03/01 15:07:57
This is before the valve job was done
This is before the valve job was done
0 2020/03/01 15:08:03
0 2020/03/01 15:08:10
0 2020/03/01 15:08:16
0 2019/05/13 14:15:32
0 2020/03/01 15:08:22
0 2019/05/13 14:15:46
0 2020/03/01 15:08:29
0 2019/05/13 14:15:58
0 2020/03/01 15:08:35
0 2019/05/13 14:16:11
Here they are machined and surfaced
Here they are machined and surfaced
0 2020/03/01 15:08:42
0 2019/05/13 14:16:26
0 2020/03/01 15:08:49
0 2019/05/13 14:20:21
A few more pictures with the missing stud installed
A few more pictures with the missing stud installed
0 2020/03/02 14:16:52
0 2019/05/13 14:20:31
0 2020/03/02 14:17:03
0 2019/05/13 14:20:53
0 2020/03/02 14:17:12
These are dated within the past 2 years
These are dated within the past 2 years
0 2020/09/06 10:03:30
0 2020/09/06 10:03:38
These are quite a bit older with only half the letters cleaned so you can see how dirty they were before
These are quite a bit older with only half the letters cleaned so you can see how dirty they were before
0 2020/09/06 10:03:45
0 2020/09/06 10:03:52
No words necessary This car speaks for itself
No words necessary This car speaks for itself
0 2020/09/06 10:03:59
0 2020/09/06 16:38:30
0 2020/09/10 12:50:54
These look so cool Maybe run a open top air cleaner lid if anyone makes one
These look so cool Maybe run a open top air cleaner lid if anyone makes one
0 2020/09/10 12:51:01
The engine in its current form The sticker is off by 100 cubic inches
The engine in its current form The sticker is off by 100 cubic inches
0 2020/09/10 12:51:07
0 2020/09/10 12:51:14
0 2020/09/10 12:56:29
It tells the number drill size of every jet. A jet size is increased not only by drill size but also by how deep the bevel reducing the distance through the hole even though it is the same diameter hole, just longer or shorter to get through it.
It tells the number drill size of every jet. A jet size is increased not only by drill size but also by how deep the bevel reducing the distance through the hole even though it is the same diameter hole, just longer or shorter to get through it.
0 2020/09/15 10:40:19
0 2020/09/15 10:40:33
0 2020/09/15 10:48:26
0 2020/09/15 10:51:33