CorvetteForum - Chevrolet Corvette Forum Discussion
0 2018/04/29 14:36:04
0 2021/07/25 15:28:35
Press in stud head being cut down.
Press in stud head being cut down.
0 2021/09/26 09:13:21
0 2020/11/21 21:09:37
0 2018/05/27 13:34:37
0 2022/11/22 05:51:53
0 2021/07/25 15:41:09
0 2023/01/17 20:01:49
0 2021/10/02 11:17:19
0 2021/07/25 15:41:32
0 2018/05/27 13:34:52
0 2023/01/18 18:27:47
0 2022/11/25 08:19:35
0 2021/10/03 16:05:39
0 2020/11/23 11:04:49
0 2021/07/27 10:00:06
0 2021/07/25 13:08:19
0 2020/11/24 16:44:36
(Top row) 0-30 in-lb Dial TQ wrench, (2nd row) pinion holder TQ bracket, Rockwell Hardness Tester File set. posi rotating tool - homemade, posi holder - old worn out yoke, 28" breaker bar (I removed the not useful beam TQ wrench)
(Top row) 0-30 in-lb Dial TQ wrench, (2nd row) pinion holder TQ bracket, Rockwell Hardness Tester File set. posi rotating tool - homemade, posi holder - old worn out yoke, 28" breaker bar (I removed the not useful beam TQ wrench)
0 2021/07/25 13:46:02
0 2021/10/03 16:06:21
0 2021/07/25 15:41:48
0 2018/05/27 13:40:09
0 2021/08/02 16:18:21
0 2021/08/02 16:27:19
(Top)Posi Shims, Carrier Shims, Pinion Shims (Mid) GM pattern paste, 8 ARP Ring Gear Bolts, 3 Diff Seals (Bottom) Pinion Lower Bearing Press Tool, Slip-Fit used Set-up Pinion Bearings, Slip-Fit carrier bearing shells for set-up, Ring Gear install screw-in studs
(Top)Posi Shims, Carrier Shims, Pinion Shims (Mid) GM pattern paste, 8 ARP Ring Gear Bolts, 3 Diff Seals (Bottom) Pinion Lower Bearing Press Tool, Slip-Fit used Set-up Pinion Bearings, Slip-Fit carrier bearing shells for set-up, Ring Gear install screw-in studs
0 2021/07/25 13:52:12
0 2018/05/27 13:40:11
0 2020/11/24 16:44:47
Other required hand tools, not for sale
Other required hand tools, not for sale
0 2021/07/25 14:06:01
0 2018/05/27 19:44:50
0 2021/07/25 14:31:37
3-1/8 " from rivet to rivet. You can even see where one mounting screw snapped.
3-1/8 " from rivet to rivet. You can even see where one mounting screw snapped.
0 2018/05/29 14:24:09
2" from front moulding
2" from front moulding
0 2018/05/29 14:25:11
0 2021/07/25 14:40:40
0 2018/06/26 13:00:01
0 2018/07/05 08:57:41
0 2018/07/05 08:58:50
0 2018/07/05 08:58:51
0 2018/07/05 08:58:53
0 2018/07/05 08:58:57
0 2018/07/05 08:59:52