CorvetteForum - Chevrolet Corvette Forum Discussion
0 2022/09/12 05:49:30
0 2022/09/12 05:49:18
0 2022/09/12 05:49:11
0 2022/09/12 05:48:55
I put the nuts on the wheel side of the fender liner.
I put the nuts on the wheel side of the fender liner.
0 2022/09/07 06:46:06
0 2022/09/07 06:46:00
I wanted to remove the carbon. On the in side of the outer rectangular chrome piece
I wanted to remove the carbon. On the in side of the outer rectangular chrome piece
0 2022/08/25 13:15:00
0 2022/08/25 13:14:54
Here is the headlight switch. 1 is positive from the battery. 2 PNL LP Fused (panel lights). With the headlight switch ON there should be positive voltage at PIN number 2,
Here is the headlight switch. 1 is positive from the battery. 2 PNL LP Fused (panel lights). With the headlight switch ON there should be positive voltage at PIN number 2,
0 2022/08/23 19:40:46
Inst cluster GRD. They are two spade lugs attached to the back of the metal gauge cluster
Inst cluster GRD. They are two spade lugs attached to the back of the metal gauge cluster
0 2022/08/23 19:40:38
20-Gray positive Illuminate LP to each gauge bulb.
20-Gray positive Illuminate LP to each gauge bulb.
0 2022/08/23 19:40:29
It’s part number 12021, the cost says $8, but this an old catalog.
It’s part number 12021, the cost says $8, but this an old catalog.
0 2022/08/18 12:33:01
0 2022/08/07 09:20:01
The receivers are on each side of the deck. I don’t use any nuts on the shafts coming out of the bottom of the hard top.
The receivers are on each side of the deck. I don’t use any nuts on the shafts coming out of the bottom of the hard top.
0 2022/08/07 09:19:48
The stainless steel round receiver is where the special screw is inserted through the hardtop bracket, vendors sell theses parts
The stainless steel round receiver is where the special screw is inserted through the hardtop bracket, vendors sell theses parts
0 2022/08/07 09:19:38
0 2022/08/07 09:19:27
The rubber cover was dyed to match the car interior
The rubber cover was dyed to match the car interior
0 2022/08/07 09:19:14
The brackets are not sold by any vendors, you would have to call a corvette salvage yard
The brackets are not sold by any vendors, you would have to call a corvette salvage yard
0 2022/08/07 09:19:05
0 2022/08/06 14:07:36
0 2022/08/06 14:06:36
The pot metal door lock control mechanism is 4001 or 4002. See the ridges where the handle slides on?
The pot metal door lock control mechanism is 4001 or 4002. See the ridges where the handle slides on?
0 2022/07/25 06:19:24
0 2022/07/21 06:37:44
0 2022/07/21 06:37:28
Make sure you have very bright light so you can see exactly what piece on the lock you are pushing. Once you get the door open, start reading how to fix the problem. Good luck
Make sure you have very bright light so you can see exactly what piece on the lock you are pushing. Once you get the door open, start reading how to fix the problem. Good luck
0 2022/07/12 06:15:21
0 2022/05/28 01:49:13
0 2022/05/28 01:49:07
0 2022/05/28 01:48:57
0 2022/05/28 01:48:51
0 2022/05/28 01:48:33
0 2022/05/28 01:48:25
0 2022/05/28 01:48:10
0 2022/05/27 07:17:27
0 2022/05/27 07:17:16
0 2022/05/23 13:17:42
Harness on my 73 manual transmission
Harness on my 73 manual transmission
0 2022/05/23 13:17:36
0 2022/05/23 13:17:24
0 2022/05/12 06:11:32
0 2022/05/12 06:11:10
0 2022/04/16 23:32:13
0 2022/04/16 23:31:50