Finally made up my mind!
Thread Starter
Instructor
Joined: Jul 2004
Posts: 117
Likes: 0
From: Frederick Maryland
Finally made up my mind!
After months of reading posts I've finally decided. I'm not ready to throw away the system, although I know I probably will someday. In the meantime I do want to improve the bass by adding a sub.
What to add? I've pondered this for months and have finally decided to go with the Bazooka BTA10200 10" 200watt. I'm not willing to sacifice the trunk space necessary for any standard sub and the people here who own these self contained subs say their a good alternative.
I know in the long run I'll end up spending more money by going this route but I'm not ready to decide on a replacement for the whole system.
Along with the Bazooka I puchased a amp wiring kit and a PAC AOEM-VET1 interface. Do I have everything I need? I hope I can figure out where the interface connects to the HU. Any help would be greatly appreciated.
Part of why I bought the Vette was to work on it and even though I'm over my head, here I go!
What to add? I've pondered this for months and have finally decided to go with the Bazooka BTA10200 10" 200watt. I'm not willing to sacifice the trunk space necessary for any standard sub and the people here who own these self contained subs say their a good alternative.
I know in the long run I'll end up spending more money by going this route but I'm not ready to decide on a replacement for the whole system.
Along with the Bazooka I puchased a amp wiring kit and a PAC AOEM-VET1 interface. Do I have everything I need? I hope I can figure out where the interface connects to the HU. Any help would be greatly appreciated.
Part of why I bought the Vette was to work on it and even though I'm over my head, here I go!
Le Mans Master
Joined: Jun 2004
Posts: 5,572
Likes: 4
From: Los Angeles Ca
have fun... it sounds like you have everything you need
check out this thread for some install instructions & links:
http://forums.corvetteforum.com/showthread.php?t=994725
check out this thread for some install instructions & links:
http://forums.corvetteforum.com/showthread.php?t=994725
Thread Starter
Instructor
Joined: Jul 2004
Posts: 117
Likes: 0
From: Frederick Maryland
Thanks,
I'm most anxious about the interface hookup. I think I read a post that talked about hooking it up on the drivers side above the gas pedal but I'm not sure.
Anyone know exactly how/where this interface connects?
I'm most anxious about the interface hookup. I think I read a post that talked about hooking it up on the drivers side above the gas pedal but I'm not sure.
Anyone know exactly how/where this interface connects?
Thread Starter
Instructor
Joined: Jul 2004
Posts: 117
Likes: 0
From: Frederick Maryland
Mike,
I understand that you have to use a line level adapter (PAC OEM-Vet1) because there's no RCA output jack on our Bose system.
You can get one at www.logjam.com for about $60.
My big concern is that the tread which showed where it attachs is no longer available. I know it's somewhere on the drivers side above the gas pedal. I'm hoping someone will chime in a show us where and how to attach it
Randy
I understand that you have to use a line level adapter (PAC OEM-Vet1) because there's no RCA output jack on our Bose system.
You can get one at www.logjam.com for about $60.
My big concern is that the tread which showed where it attachs is no longer available. I know it's somewhere on the drivers side above the gas pedal. I'm hoping someone will chime in a show us where and how to attach it
Randy
Thread Starter
Instructor
Joined: Jul 2004
Posts: 117
Likes: 0
From: Frederick Maryland
