Replacement LED 3157 Driving/Blinker Lights
Thread Starter
Racer
Joined: Apr 2006
Posts: 386
Likes: 0
From: Wichita Kansas
Replacement LED 3157 Driving/Blinker Lights
Hey guys,
Anyone know what size resistor would be required if I was going to replace the driving/blinker stock 3157's with LED's. I'm figuring 1K, but thought one of you might know. I'm also replacing the 3157 blinkers in the rear as I have the clear euro taillights. And yes I'm already running white bulbs. It's legal here in Kansas.
Thanks,
Dave
Anyone know what size resistor would be required if I was going to replace the driving/blinker stock 3157's with LED's. I'm figuring 1K, but thought one of you might know. I'm also replacing the 3157 blinkers in the rear as I have the clear euro taillights. And yes I'm already running white bulbs. It's legal here in Kansas.
Thanks,
Dave
Burning Brakes
Joined: May 2003
Posts: 822
Likes: 1
From: College Station TX
Thread Starter
Racer
Joined: Apr 2006
Posts: 386
Likes: 0
From: Wichita Kansas
Thanks for the link, but I was basically wondering what resistance these devices put into the system so I could pick something up at Radio Shack. What wattage rating and ohm rating resistor should I buy? Their ohm rating looks low to me compared to what I've done in the past.
Dave
Dave
Advanced
Joined: Dec 2005
Posts: 95
Likes: 0
From: Wichita KS
Last edited by zombywuf; Sep 2, 2006 at 11:30 PM.
