[C4] System started
Le Mans Master
Joined: Nov 2004
Posts: 8,718
Likes: 20
From: Dyer IN
Cruise-In IX Veteran
not latex backed or anything like that i belive there is no backing to it but im not sure u would think i would no how to carpet with all the installs i do but no so much. I have the glue and all the stuff as well
Thread Starter
Race Director
Joined: Mar 1999
Posts: 12,597
Likes: 237
From: Bartlett Illinois
Thread Starter
Race Director
Joined: Mar 1999
Posts: 12,597
Likes: 237
From: Bartlett Illinois
Well I did about 5 min of work yesterday. I had a piece carpeted from when I installed my old Phoenix Ti500.4 that was used for the cover..
Anyway it will work for a front mount for the Storage boxes but it shifts the storage box back about 3/4"
I have to spend some time looking at it closer and detemine if I will use it with the bin pushed back or redo a front piece to mount the storage boxes in the OEM location just flush with the back 1/2.
I am also giving some serious thought it a plexi cover for the amps.. maybe tomorrow I will get some time to get a few more pieces installed..
Anyway it will work for a front mount for the Storage boxes but it shifts the storage box back about 3/4"
I have to spend some time looking at it closer and detemine if I will use it with the bin pushed back or redo a front piece to mount the storage boxes in the OEM location just flush with the back 1/2.
I am also giving some serious thought it a plexi cover for the amps.. maybe tomorrow I will get some time to get a few more pieces installed..
Thread Starter
Race Director
Joined: Mar 1999
Posts: 12,597
Likes: 237
From: Bartlett Illinois
Thanks.. I have a small bit more done but I got side tracked with my new seats.. LOL I have been working on getting those together and now I need to get leather for them..
Anyway, I might get a chance to do a bit more this weekend..
I am thinking at least getting the power, ground and remote wires connected and get the amps gains set.
Anyway, I might get a chance to do a bit more this weekend..
I am thinking at least getting the power, ground and remote wires connected and get the amps gains set.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Race Director
Joined: Mar 1999
Posts: 12,597
Likes: 237
From: Bartlett Illinois
More completed
Today I ditched the crappy sound deadener from the Storage lids, replaced with 2 layers of V4.
I got both amps power run and speaker wire run, Although the subs are not connected as I need to set the gains
Now any ideas how to recarpet the sides like shown with out using pre-molded carpet?
LINK to rest of Pictures
I got both amps power run and speaker wire run, Although the subs are not connected as I need to set the gains
Now any ideas how to recarpet the sides like shown with out using pre-molded carpet?
LINK to rest of Pictures
Last edited by -=Jeff=-; Jan 6, 2007 at 10:15 PM.
Thread Starter
Race Director
Joined: Mar 1999
Posts: 12,597
Likes: 237
From: Bartlett Illinois
More updates
Mounted the CDT Crossovers. The Remote turn on lead is not wired permanently yet though
then remounted the Storage Bins.
Now I need to finish the top cover and carpet everything, then I can move to installing the CDT Speakers (Currently I am using the old Bostons which are still installed)
then remounted the Storage Bins.
Now I need to finish the top cover and carpet everything, then I can move to installing the CDT Speakers (Currently I am using the old Bostons which are still installed)
Le Mans Master
Joined: Jun 2004
Posts: 5,572
Likes: 4
From: Los Angeles Ca
Thread Starter
Race Director
Joined: Mar 1999
Posts: 12,597
Likes: 237
From: Bartlett Illinois
Getting closer..
I have to say it is funny how I have black carpet and int he picture there are 3 shades but without the flash you cannot tell the difference.
I need to order a bit more for the amp cover. I also Have an emblem on the way too.. the cover will be very cool
At this point I can move tot he door and the front to get them apart and finished
I have to say it is funny how I have black carpet and int he picture there are 3 shades but without the flash you cannot tell the difference.
I need to order a bit more for the amp cover. I also Have an emblem on the way too.. the cover will be very cool
At this point I can move tot he door and the front to get them apart and finished