Confused about OEM integration module?
Thread Starter
Pro
Joined: Apr 2012
Posts: 584
Likes: 13
From: Eugene Oregon
Confused about OEM integration module?
I could use some help getting my Kenwood Nav unit properly installed. I have Onstar but I am not subscribed. Current radio is the base Delco. Year is 2010. I have read the FAQ and the models listed for OnStar cars seem to be for the Bose setup? Can someone give me the correct model?
Also, I selected the Metra ASWC-1 for steering wheel control integration. Is that OK? Thanks.
Also, I selected the Metra ASWC-1 for steering wheel control integration. Is that OK? Thanks.
Tech Contributor
Joined: May 2003
Posts: 7,035
Likes: 134
From: North Augusta, SC
If you do NOT want to keep OnStar functional, the C2R-GM24 is perfect for either Bose or non-Bose.
If you DO want to keep the OnStar functional, then OS-2C for non-Bose.
Any SWI that can control Kenwood should work AFAIK. Connect +12v to plug C1 pin A6, then connect A7 to SWI input wire.
Contact Dennis at DoubleDmods to make sure of my adapter info, I may have missed a newer model that could be better
C6 prints are HERE if you need them.
If you DO want to keep the OnStar functional, then OS-2C for non-Bose.
Any SWI that can control Kenwood should work AFAIK. Connect +12v to plug C1 pin A6, then connect A7 to SWI input wire.
Contact Dennis at DoubleDmods to make sure of my adapter info, I may have missed a newer model that could be better
C6 prints are HERE if you need them.
