Factory amp type?
Thread Starter
Instructor
Joined: Oct 2016
Posts: 103
Likes: 5
From: Rayville LA
Factory amp type?
I am trying to put an aftermarket headunit in my wife’s 2006 C6. I am using an Axxess ax-gmcl2-swc interface. In the instructions it has directions for both analog and digital amps, which type do these cars have? Her car has a 7 speaker Bose system. Thanks for any help.
Le Mans Master
Joined: Jan 2017
Posts: 6,140
Likes: 1,962
From: Morris County New Jersey
Follow the directions for digital amplifier. I'm not sure why they word it that way. Either your car has an factory amplifier or not, very simple, but they try to word it to make it more complicated and confusing.
I always prefer the Pac Audio interfaces. They are not perfect either, but I always consider them the best available option.
I always prefer the Pac Audio interfaces. They are not perfect either, but I always consider them the best available option.
Thread Starter
Instructor
Joined: Oct 2016
Posts: 103
Likes: 5
From: Rayville LA
Follow the directions for digital amplifier. I'm not sure why they word it that way. Either your car has an factory amplifier or not, very simple, but they try to word it to make it more complicated and confusing.
I always prefer the Pac Audio interfaces. They are not perfect either, but I always consider them the best available option.
I always prefer the Pac Audio interfaces. They are not perfect either, but I always consider them the best available option.
Ok, I will do that. I had actually bought this interface for another vehicle I had and it will work on the Vette so I figured I would give it a try. If it don’t work for some reason I will definitely get a PAC one. Thanks for the help.
Advanced
Joined: Sep 2017
Posts: 52
Likes: 8
From: Newton NH
sorry to resurrect an old thread, but how did that interface work, i've been looking at using that in mine.
Thread Starter
Instructor
Joined: Oct 2016
Posts: 103
Likes: 5
From: Rayville LA
Advanced
Joined: Sep 2017
Posts: 52
Likes: 8
From: Newton NH
