Problem With ACC
Thread Starter
Racer
Joined: Dec 2001
Posts: 313
Likes: 0
From: Long Island NY
Problem With ACC
I wired up the Passenger fuse compartment for 12+ switched and am getting voltage all the way to the HU wiring harness. I am also getting negative to the wiring harness. I am not getting HU to switch on. I tested the ACC connector on wiring harness and it appears that I am getting no signal. I tested ACC by connecting to ground and connecting to the pin that ACC goes to on the wiring harness and got nothing. Do I have to by pass the wiring harness for acc and splice off of another wire like I did with +12V? The HU works on my bench so I do not believe that there is problem with the HU. Any help would be appreciated.
