chrome plating prices
#21
Race Director
I use a local chromer in Providence, RI and NuChrome is close in Mass. I used the smaller guy because he uses the "original" type of chrome which I think is nicknamed Black Chrome. Other companies use a newer type that looks super but different against original parts. Look into Trivailant and Hexavailant chrome (don't trust the spelling). The type of plating will have a big affect on the cost and durability of the finish.
#22
Melting Slicks
Quick Question??? Do any of these shops straighten the bumpers??? Most don't. They just take the units and rechrome them.
#23
Le Mans Master
#24
I hear they are pricey though
http://www.streetperformance.com/par...bumper-co.html
#25
Le Mans Master
I was at a local Corvette swap meet and there were 2 vendors there (both out of Ca.). I got similar quotes of $225 per corner and $85 for the front center bar. That is triple plated show chrome, lifetime warranty and straightening and minor repairs included. It is more if there are rust through holes that need to be welded up etc. They are here several times a year so there is no shipping.
Jim
Jim
#26
Race Director
As far as straightening the top of the bumpers, you need to consider whether you want to stay "original" or not. The C2 vettes came with ripples, especially the rear bumpers.
#27
Melting Slicks
My original units never had any ripples in them. The rears are still on the car but the fronts had damage to them and needed rechrome. I sent them away to get redone and the chrome shop stated that the right front was to thin to replate. They did rechrome the left but sent it back without straightening it. Did me no good.
#28
Race Director
My original units never had any ripples in them. The rears are still on the car but the fronts had damage to them and needed rechrome. I sent them away to get redone and the chrome shop stated that the right front was to thin to replate. They did rechrome the left but sent it back without straightening it. Did me no good.
#30
Team Owner
If you are referring to my grill surrounds on the '61 (THAT story)...short & sweet. I took upper and lowers to a place in Kissmmee, Florida and was impressed that the owner knew exactly what they were before I even opened my mouth. He had some Bentley wheels on the floor he had just rechromed and they looked incredible. So I gave him my deposit and left the parts. Picked them up in two weeks and they were horrible...there was actually an air bubble under the chrome you could push around with your finger...and lots of the pitting was still visible. Owner apologized and said leave them with him. Three months later and several complaints to the Florida BBB and others and I picked up the parts and most of my money. They were still crappy so I sold them on eBay and got originals rechromed from SpaceCoast (they are perfect). Just one of life's lessons I guess.
I don't know what the forum rules are for panning a company so I redacted the name but going to the BBB does get results...here is this "businessman's" current rating, largely based on my complaint!
I don't know what the forum rules are for panning a company so I redacted the name but going to the BBB does get results...here is this "businessman's" current rating, largely based on my complaint!
Last edited by Frankie the Fink; 01-23-2011 at 09:59 AM.
#33
Drifting
I just sent mine to Virginia Vettes on Thurs. Dick said 2-3 weeks. I'll post pics when I get them. He did my hockey sticks last year and they looked great. Shemp
#34
Burning Brakes
I had Space Coast Plating do a left rear mid-year bumper for me last winter. They took out two dents on the bottom about a quarter inch deep and welded up a severe "nick" on the edge. Charged me about $225 including shipping. They did an excellent job and I highly recommend them.
#36
Great price,great service with a quick turn around. Very pleased with the result. I highly recommend Virginia Vettes !
#37
Le Mans Master
#38
Le Mans Master
You can thank the EPA and a dwindling customer base.
How much chrome do you see on modern autos? The chrome they have is cheaper to just replace instead of re-chrome.
Fewer platers = higher prices