63 SWC restomod build
#41
Heres some side pics of the quarter panels. There not GTS i used J&M from Brooksville Fl they were closer and cheaper and they came down 1 weekend so i got free shipping.
#44
#45
Intermediate
#47
#48
Advanced
Member Since: Dec 2011
Location: San Diego California
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Hey fellas looking to start my restomod 2014. What size wheels tires and offset for the 345's. I'd like to run ZR1 F19X10 R20X12 to hug some 345's , but not sure the SRiii chassis supports something that big in the front.
#50
Advanced
Member Since: Dec 2011
Location: San Diego California
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
I think an adjacent forum said stock ZR1 20X12 and 19X10 fits but I'll make sure to speak with Mike at SRiii about the fit. I will definitely run the 1" wider Rear GTS quarters. Thanks
Last edited by SoCalC2; 05-03-2013 at 08:46 AM.
#51
Melting Slicks
Do you still have the Keisler mock up case or did you have to send it back to them? I have the same setup as you and am tying to finalize the body mount thickness. What thickness body mounts did you use and how close did the SS700 come to touching the body? On mine, it looks like the exhaust pass through holes on the trans. crossmember will touch the body first, if not the trans. case itself. I just don't have the trans. to see for myself.
#52
Do you still have the Keisler mock up case or did you have to send it back to them? I have the same setup as you and am tying to finalize the body mount thickness. What thickness body mounts did you use and how close did the SS700 come to touching the body? On mine, it looks like the exhaust pass through holes on the trans. crossmember will touch the body first, if not the trans. case itself. I just don't have the trans. to see for myself.
#53
Racer
I just bought a 63swc and considering a very similar route. I was looking at Street Shop and the Roadster Shop frame what convinced you to go with SRIII.
Thanks
Thanks
#54
Because SRIII is the best hands down and Trey from street shop is an *** he never answers the phone and his frame looks very cheap. I didn't see the roadster frame but I like what I got.
#56
Drifting
Member Since: Jan 2008
Location: San Antonio Texas
Posts: 1,584
Received 319 Likes
on
181 Posts
2020 C1 of the Year Finalist - Modified
BTW....It's been over a year since the last post on this thread and you just now..."got a few new parts today."....????...Project Creep!...
#57
Safety Car
Having used both frames, i will say the SRIII Chassis is far superior!
Not my videos, but something i stumbled upon. SS chassis frame flex
http://s195.photobucket.com/user/noC...f41ee.mp4.html
http://s195.photobucket.com/user/noC...709fa.mp4.html
Not my videos, but something i stumbled upon. SS chassis frame flex
http://s195.photobucket.com/user/noC...f41ee.mp4.html
http://s195.photobucket.com/user/noC...709fa.mp4.html
Last edited by 65silververt; 08-07-2014 at 08:02 AM.