When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You can use the Lime Book at the top of this page in the "sticky" section to decode this for you.
P.S. This is your third post in two days and you haven't thanked one person for their help yet. Keep it up and nobody will help you in the future.
Not from 1965. If it were from 1965 it would start with an F for Flint. The V for Flint was used starting in 1967. No HV code used in '67 or '68. There is an HV in '69. In '69 it = 350ci 255hp with a 350 turbohydramatic. What is the date on the block?
It’s on the back of the block on the flange where the bellhousing/ auto trans attaches to the block. It will be a letter then the day and then the year. Like A 10 6. Or January 10 1966
Not from 1965. If it were from 1965 it would start with an F for Flint. The V for Flint was used starting in 1967. No HV code used in '67 or '68. There is an HV in '69. In '69 it = 350ci 255hp with a 350 turbohydramatic. What is the date on the block?
Yes i did thank you i didnt see the separate switch under dash that's how knowledgeable i am
Then you should go back to that post and state the follow up. It should not be left hanging for others to keep trying to help when you don't have a problem. Always post the resolution, it will help everyone.