64 L84 Previously in for sale section
The following users liked this post:
napa68 (03-23-2021)
The following users liked this post:
napa68 (03-23-2021)
#143
Burning Brakes
Thread Starter
I started to make the plug wires and screw it together today. Waiting on different terminal ends for the distributor side of the wires (wasn't impressed with what came in the set).
I've got to dig through my collection of junk shielding to see what I have for the plug shielding. I just laid the F.I. unit on there for now
Starting to look like nothing ever happened
I've got to dig through my collection of junk shielding to see what I have for the plug shielding. I just laid the F.I. unit on there for now
Starting to look like nothing ever happened
The following users liked this post:
Westlotorn (03-23-2021)
#144
Burning Brakes
Thread Starter
The trans is here, the shifter is adjusted (installed the 65 shifter arms for a shorter throw), and now everything is installed or at least mocked up. I suspect an install is in the cards today or tomorrow.
The following 2 users liked this post by napa68:
jimgessner (04-02-2021),
MrTrim (04-01-2021)
#145
FYI, the drivers side vertical ignition shield you installed is a 1963 shield, 64 thru 67 all the same.
#147
Burning Brakes
Thread Starter
This project is coming to an end (at least for now). I replaced all of the suspension bushings along with all new ball joints, tie rods, idler, etc. The timing is set, engine is tuned, brakes are bled, and all appears to be working as it should. Put the hood on, get it aligned, get the parts store alternator out of it, and start cranking on some miles. Should be a fun summer!
And a little walk around video.........I like the cam
And a little walk around video.........I like the cam
The following users liked this post:
napa68 (04-29-2021)
#149
Race Director
Member Since: Feb 2007
Location: northern california
Posts: 13,651
Received 6,573 Likes
on
3,024 Posts
C2 of Year Finalist (track prepared) 2019
The following users liked this post:
napa68 (04-30-2021)
The following users liked this post:
napa68 (04-30-2021)
#153
Melting Slicks
Member Since: Jan 2009
Location: High Mountains of New Mexico
Posts: 3,271
Received 1,392 Likes
on
684 Posts
2023 C2 of the Year Finalist - Unmodified
2021 C2 of the Year Finalist - Unmodified
2015 C3 of the Year Finalist
Interesting, I will be watching, I am thinking about putting my '64 fuelie tanker on BaT.
The following users liked this post:
napa68 (02-15-2022)
#154
Team Owner
Member Since: Apr 2008
Location: Coloring within the lines
Posts: 27,465
Received 1,921 Likes
on
1,334 Posts
What a great car. Love it!
The following users liked this post:
napa68 (02-16-2022)
#155
Le Mans Master
Member Since: Oct 2007
Location: Richmond Kentucky
Posts: 5,719
Received 1,240 Likes
on
457 Posts
2022 Corvette of the Year Finalist -- Modified
2021 C2 of the Year Winner - Modified
2021 C1 of the Year Winner - Modified
2020 Corvette of the Year (stock)
C2 of Year Winner (stock) 2019
2017 C1 of the Year Finalist
The following users liked this post:
Rick Gower (02-17-2022)
#156
Melting Slicks
Member Since: Jan 2009
Location: High Mountains of New Mexico
Posts: 3,271
Received 1,392 Likes
on
684 Posts
2023 C2 of the Year Finalist - Unmodified
2021 C2 of the Year Finalist - Unmodified
2015 C3 of the Year Finalist
Ha! Yes, as I have 3 I can understand the question, it is the white/tan one with the J65 brakes. The black/silver one is not for sale at this time.