[C1] Issues with using 57 frame with 58-60 body ?
#1
Burning Brakes
Thread Starter
Issues with using 57 frame with 58-60 body ?
Other than a 57 frame not having mounting points for bumper brackets are there any other issues I’d run into when putting a 58-60 body onto a 57 chassis ?
Related question- what’s best way to fabricate the spots to mount the bumper brackets ?
Thanks !
Related question- what’s best way to fabricate the spots to mount the bumper brackets ?
Thanks !
#2
Drifting
Here are a few threads on the topic, but only a little on the bumper bracket location. Good luck!
https://www.corvetteforum.com/forums...terchange.html
https://www.corvetteforum.com/forums...changable.html
https://www.corvetteforum.com/forums...ible-deal.html
https://www.corvetteforum.com/forums...-the-same.html
https://www.corvetteforum.com/forums...terchange.html
https://www.corvetteforum.com/forums...changable.html
https://www.corvetteforum.com/forums...ible-deal.html
https://www.corvetteforum.com/forums...-the-same.html
The following users liked this post:
ryan22 (08-28-2021)
#3
Drifting
Mike
#4
Drifting
This 58-62 frame just came up for sale in the parts section. It is in Nebraska.
https://www.corvetteforum.com/forums...tte-frame.html
https://www.corvetteforum.com/forums...tte-frame.html