#2 body mount
#1
Instructor
Thread Starter
Member Since: May 2005
Location: West Branch MI
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
#2 body mount
The passenger side number 2 body mount spins, but it sounds like something underneath is also spinning, so it doesn't loosen up. Anyone have a way to get the bolt off?
I so far have the #1,2,3, and almost 4 mounts loose on the driver's side. What do you do if one breaks off or strips?
I so far have the #1,2,3, and almost 4 mounts loose on the driver's side. What do you do if one breaks off or strips?
#2
Race Director
Sounds like the captive nut on the frame is spinning. You probably will have to torch the head off the bolt. Once the body is off you can replace the nut.
#3
Instructor
Thread Starter
Member Since: May 2005
Location: West Branch MI
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Is there any chance I'd be able to use a die grinder (have that...don't have a torch) to cut the bolt head off? Any other possible alternatives?
#4
Race Director
If you can get to the bolt head with a die-grinder, sure. Just get a metal cutting disk and it will cut it in seconds. The trick will be to reach the bolt.
Maybe you can reach it with a saw-z-all???
Maybe you can reach it with a saw-z-all???
#6
Instructor
Thread Starter
Member Since: May 2005
Location: West Branch MI
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Just used a Harbor Freight 3" grinder and it worked great! First time using it (Birthday present in March) and I'm VERY happy with it. That #2 mount is no longer a problem (for now).