headlight dr prob.
Thread Starter
Instructor
Joined: Mar 2003
Posts: 174
Likes: 0
From: Eustis fl
headlight dr prob.
Hi, I've got a prob. with my headlight dr. They don,t go up to good. One not at al unless you help it. I found a bunch of vac leaks at connections, so I clamped or tie rappewd them. The actuater relays I think you call them at the front by the hood are hissing. I think that would mean there shot, right? Are they repairable. I bypassed it for the dr. that didn,t open at all, big improvement, but still didn't open all the way. Any advise? Allso, I saw a book recently on the vac system, repasiring them, butforgot where I saw them. Anyone know where to get one?
Melting Slicks
Joined: Apr 2002
Posts: 3,268
Likes: 2
From: Minnesota in the summer, Las Vegas in the winter
Joe
I'm not going to jump in here because I barely know what I'm doing on this subject. Some folks will help you. You should list the year of your car here so the experts can give accurate information.
I'm not going to jump in here because I barely know what I'm doing on this subject. Some folks will help you. You should list the year of your car here so the experts can give accurate information.
Team Owner
Joined: Sep 2006
Posts: 31,301
Likes: 4,389
From: Westminster Maryland
Many of the vendors offer trouble shooting guides and vacuum hose diagrams. Dr. Rebuild has good, accurate ones. There are also lots of information in past posts on this site. You really need the guides to understand how the systems are supposed to work and how to repair yours. It gets expensive quickly if you just start replacing parts.
Regards,
Alan
Regards,
Alan
Thread Starter
Instructor
Joined: Mar 2003
Posts: 174
Likes: 0
From: Eustis fl
I forgot. Its a 71. Thanks, I'll check out dr. rebuild. Yea, those actuators are 60.00 sa. I think I need three, and probably other parts too. I guess its not a bad price to pay to have such a cool car.
Burning Brakes
Joined: Oct 2006
Posts: 1,044
Likes: 0
From: Henrico VA
Try something with the car on. The hose that goes into the bottom of the actuator on each side should have a green stripe through it. Next to it, there is a doglip seal around a metal bar. Try pushing the seal up into the light and seeing if the light goes up. These are known for going bad. I've dealt with a variety of vacuum issues on mine, but it's pretty cool the first time you get everything working. I'm sure some of us can walk you through this.
Drifting
Joined: Aug 2002
Posts: 1,731
Likes: 22
From: Marietta Ga.
Don't buy any actuators until you have checked out the rubber vacumn lines and the plug and nipple on them, my system didn't work when I bought my '72 and all I ended up replacing was the plug and nipple on the wiper actuator.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
