Drag Link Installation
Thread Starter
Melting Slicks
Joined: Feb 2001
Posts: 2,608
Likes: 3
From: TEXAS - you mean there are other states?
Drag Link Installation
Question on installing the drag link for the front steering on a 69 BB. The AIM indicates there should be a .06" - .12" space (???) between the threaded end of the draglink to the control valve assembly. Is this correct and why is this necessary ??
Thread Starter
Melting Slicks
Joined: Feb 2001
Posts: 2,608
Likes: 3
From: TEXAS - you mean there are other states?
right - ok - so just snug it up as best you can to the control valve and back it off if you have too to make the flat area line up with the bolt? In other words, the draglink and the control valve do not have to be absolutley snug to each other? thanks
