Idler Arm Info
#1
Melting Slicks
Thread Starter
Idler Arm Info
On my 69 I am trying to find the Idler Arm in the AIM manual.... I see page J233, but do not see a specific reference to it or its torque values. Anyone know where this info is in AIM in particular?
#2
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Bud,
For 71... Page L220, UPC 9, Sheet A2 ... 25 to 35 ft/lbs. for the 2 bolts that mount it to the frame.
Regards,
Alan
For 71... Page L220, UPC 9, Sheet A2 ... 25 to 35 ft/lbs. for the 2 bolts that mount it to the frame.
Regards,
Alan
#3
Team Owner
If a specific assembly 'activity' was performed at the Corvette final assembly plant (St. Louis / Bowling Green), the details are in the AIM. If the component was a sub-assembly built in another plant, the details are NOT in the AIM. For example, the engines were procured from other GM plants as a completed assembly; they are shown as a specific part number in the AIM and there or no details on its assembly.
#4
Melting Slicks
Thread Starter
thanks guys = saw the bolts to mount the idler to the frame, but not to the drag link... I should have specified.
#5
Melting Slicks
Thread Starter