Exhausted
Thread Starter
Racer
Joined: Apr 2008
Posts: 418
Likes: 0
From: destin fl
Exhausted
SB C3 ANGLE PLUG HEAD OWNERS
FORGET ABOUT GETTING HOOKER SIDE EXIT HEADERS. OR ANY OTHER MAKERS OF THE C3 SIDE PIPE HEADERS. THEY SIMPLEY DO NOT EXIST IN THEIR INVENTORY
ON A POSITIVE NOTE SUPPORT OUR TROOPS
AND HAPPY BIRTHDAY AMERICA
FORGET ABOUT GETTING HOOKER SIDE EXIT HEADERS. OR ANY OTHER MAKERS OF THE C3 SIDE PIPE HEADERS. THEY SIMPLEY DO NOT EXIST IN THEIR INVENTORY ON A POSITIVE NOTE SUPPORT OUR TROOPS AND HAPPY BIRTHDAY AMERICA
Melting Slicks
Joined: Jul 2006
Posts: 2,373
Likes: 6
From: Baltimore MD
I have edelbrock angle plug heads,victor jr,and i have hooker super comp headers ,not side pipe.and i got short plugs and i have plenty of space,what is your problem with your headers.Just wondering what you guys problem is.There must be some kind of difference between the straight headers and the side pipe headers.
Melting Slicks
Joined: Jul 2006
Posts: 2,373
Likes: 6
From: Baltimore MD
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Melting Slicks
Joined: Jul 2006
Posts: 2,373
Likes: 6
From: Baltimore MD
Instructor
Joined: Apr 2008
Posts: 123
Likes: 0
From: San Diego California
actually, I saw a guys do that with a Trans-Am mustang. Works really well, holds everyting in place and out of the way. Kinda cheap, but I think it looks more Racey than a plastic holder that bolts to the valve covers....Also, it gives better acces to them from above, rather than feeding them under the headers
Melting Slicks
Joined: Jul 2006
Posts: 2,373
Likes: 6
From: Baltimore MD
Whats going in with all you guys,did you figure out a solution to the spark plug problem,i rechecked mine,put the headers on my engine on the stand and you are right # 6 plug wont work.Whats our solution,and what headers would work on our type heads? Bill
Melting Slicks
Joined: Jul 2006
Posts: 2,373
Likes: 6
From: Baltimore MD
What size tubes did the hedmans have?I think i will just have to dent the tube like you did.
Melting Slicks
Joined: Jul 2006
Posts: 2,373
Likes: 6
From: Baltimore MD
Yellow72 you have trick flow heads,they are different then edelbrock heads,edelbrock changed their angle heads and they do not make a header that fits our cars (corvette).You have to get custom headers made,which really pisses me off because they dont tell you this in any advertisement.I called edelbrock and talked to their rep, and he told me i could only go to kooks or lemons to have custom headers made(kiss my ***) im pissed at the guy and tell him i have alot of guys on the corvette club ,that are having the same problem and he tells me they cant be concerned with them.
oh im stoked now of the lack of regard for this problem.So i recomend that everybody dont buy their heads.Just a heads up. Bill
oh im stoked now of the lack of regard for this problem.So i recomend that everybody dont buy their heads.Just a heads up. Bill
