Has anyone painted there rally wheels to match there car?
#24
Instructor
Years ago I put together a set of center caps to have something "different". I used the '67 flat center caps and instead of the normal small center emblem, I used the spinner off of a mid sixtys Chevrolet wire wheel cover. They used the same screws and the holes lined up perfectly. They looked really good on 8" wheels and with the bowtie on them, they looked like a factory piece. I had quite a few people ask what model car they came from. I too like to keep my cars original looking, but sometimes you just want something different and that was something you could change back very easily. The spinners I used were repros of the factory part from a company called Clarks Corvair Parts. I doubt they still exist but maybe someone else makes them. Those wire covers were offered in 14" and 15" on Impalas, Camaros, Corvairs, Chevelles, and Novas.
P.S. I just Googled Clarks Corvair Parts and they are still around and still offer the spinners!
P.S. I just Googled Clarks Corvair Parts and they are still around and still offer the spinners!
Last edited by Paul Drennan; 06-04-2009 at 09:40 PM. Reason: Added information
#26
Drifting
Thread Starter
Member Since: Apr 2009
Location: Melbourne Australia
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
#29
Melting Slicks
shmoky
Last edited by shmoky; 06-05-2009 at 12:06 AM. Reason: spelling
#30
Drifting
Thread Starter
Member Since: Apr 2009
Location: Melbourne Australia
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
#32
Melting Slicks
Hope this helps.
shmoky
#33
Racer
Member Since: Dec 2006
Location: Nashville Tennessee
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '10
When you look at your pic., your rings are so shiny and deep the red reflects and it looks like you have another smaller, thin ring on there.
See what I/We mean?
[/QUOTE]
Bobby
#34
Drifting
Thread Starter
Member Since: Apr 2009
Location: Melbourne Australia
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
Jim, the spinners are a 1 piece and attatch the same as the original center cap. As mentioned before Willcox has them and there are 3 different styles: straight chrome, fluted swept chrome and plain swept chrome. Here is a link http://willcoxcorvette.com/advanced_...ywords=spinner if this doesn't work just do a search at willcox for "spinner".
Hope this helps.
shmoky
Hope this helps.
shmoky
Hi shmoky,
thanks for the link, i'll definitely buy a set.
Jimo
#35
Drifting
Thread Starter
Member Since: Apr 2009
Location: Melbourne Australia
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
Hi Mate, thanks for the link, just waiting on delivery costs to Australia.I also printed off your corvette picture and put it in my garage, love your car!! thanks again