Engine Compartment Paint...
Thread Starter
Drifting
Joined: Apr 2007
Posts: 1,892
Likes: 3
From: Springfield Illinois
Engine Compartment Paint...
What have you guys used for painting your engine compartment? I would like to use something that is not an aerosol. My 2 reasons for not wanting an aerosol is 1) I don't want overspray on everything and 2) Aerosol paint seems to be more brittle... So what are your suggestions ands thoughts??
Thread Starter
Drifting
Joined: Apr 2007
Posts: 1,892
Likes: 3
From: Springfield Illinois
That looks really nice!! I guess I can kind of see where you are coming from. I was thinking about painting it on with a foam brush, color sanding, and buffing by hand. What type of paint did you use?
Thread Starter
Drifting
Joined: Apr 2007
Posts: 1,892
Likes: 3
From: Springfield Illinois
I'll take your guys advice... I currently have my engine out anyway... So i guess it can't be that bad! My goal is to make engine compartment look pretty and not like a nightmare like it did before. I don't think it is really going to matter what I do when people see a brand new big block sitting under the hood! 
Thanks for the advice!
Thanks for the advice!
Le Mans Master
Joined: Jan 2007
Posts: 8,026
Likes: 3,343
From: Omaha NE
2025 c3 ('74-'82) of the Year Finalist - Unmodified
2023 C3 of the Year Finalist - Unmodified
2022 C3 of the Year Finalist - Unmodified
2020 C3 of the Year Finalist - Unmodified
Here's what I was able to do with spray. We all know what a nice job the factory did to finish the firewall so I thought I'd do something about it. I filled & smoothed until it looked like one piece, the way it should of been. I used Dupli-Color primer & engine enamel, 3 coats of each. Satin is correct but I went gloss to add a little bling....
..
..
Melting Slicks
Joined: Jan 2007
Posts: 2,589
Likes: 5
From: Salisbury Maryland
Just finished painting my firewall and engine bay over the weekend. Motor is out, but there are lots of wires and hoses in place. I saved paper towel and TP rolls for about 3 months and used them to covers everything. I don't have any pictures yet, but it looks great. Can't wait to get the motor in!
Used a low gloss black epoxy paint, shot on with air brush. Moved things out of the way all the way around. I'll post some pics later on down the road.
Used a low gloss black epoxy paint, shot on with air brush. Moved things out of the way all the way around. I'll post some pics later on down the road.
Former Vendor
Joined: Feb 2005
Posts: 609
Likes: 1
What have you guys used for painting your engine compartment? I would like to use something that is not an aerosol. My 2 reasons for not wanting an aerosol is 1) I don't want overspray on everything and 2) Aerosol paint seems to be more brittle... So what are your suggestions ands thoughts??
The quart kit includes a quart of paint, a pint of reducer and a half pint of catalyst ......Price $40
The 11oz. spray can is .........$6
We aslo have Semi-Gloss Black Lacquer in spray cans at ........$6/can.
Most customers use the former for engine compartments
Virginia Vettes
1-757-229-0011
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Melting Slicks
Joined: Mar 2006
Posts: 2,248
Likes: 67
From: Warrington PA
Finalist 2020 C4 of the Year - Unmodified
found it today.....
on vaca up in Maine, stopped at Wal Mart for a few items and what do I see, but Krylon # 1613 Satin Black @ $2.94 per can, bought a case of 6, couldn't pass up the price...
also what is your opinion for Krylon Pumpkin Orange to use for the engine, is it the correct orange (the cap looks good and so does the pic), and will it withstand engine heat??? thanks....Tom
PS: all of the above engine compartments look great, can I hire you guys????? Hope mine will turn out just as good as all of yours did....nice job
also what is your opinion for Krylon Pumpkin Orange to use for the engine, is it the correct orange (the cap looks good and so does the pic)
, and will it withstand engine heat??? thanks....TomPS: all of the above engine compartments look great, can I hire you guys????? Hope mine will turn out just as good as all of yours did....nice job
Last edited by 74 LS4-454; Jun 10, 2009 at 10:37 PM.
Melting Slicks
Joined: Feb 2002
Posts: 2,625
Likes: 0
From: Cut n Shoot TX
on vaca up in Maine, stopped at Wal Mart for a few items and what do I see, but Krylon # 1613 Satin Black @ $2.94 per can, bought a case of 6, couldn't pass up the price...
also what is your opinion for Krylon Pumpkin Orange to use for the engine, is it the correct orange (the cap looks good and so does the pic), and will it withstand engine heat??? thanks....Tom
PS: all of the above engine compartments look great, can I hire you guys????? Hope mine will turn out just as good as all of yours did....nice job
also what is your opinion for Krylon Pumpkin Orange to use for the engine, is it the correct orange (the cap looks good and so does the pic)
, and will it withstand engine heat??? thanks....TomPS: all of the above engine compartments look great, can I hire you guys????? Hope mine will turn out just as good as all of yours did....nice job
Thread Starter
Drifting
Joined: Apr 2007
Posts: 1,892
Likes: 3
From: Springfield Illinois
Le Mans Master
Joined: Oct 2005
Posts: 6,247
Likes: 471
From: Glen Allen, VA
Krylon is fine for the enigine compartment, not the engine itself. I painted mine with 1613 2 years ago and its still holding up fine. I can personally attest to people who have had it last many many more years than that.
Instructor
Joined: Aug 2008
Posts: 159
Likes: 0
From: Northern California
Thanks for the pics, fellas! Gave me some great ideas. I'm in the same boat... my firewall looks like crud and needs to be cleaned up and repainted, but I just dropped the new engine in back in October and I don't want to go through the hassle of taking it all back out.
