Master Cylinder Question

Reply Subscribe

Thread Tools

Search this Thread

Jun 21, 2009 | 10:01 AM

depdep3

Thread Starter

Instructor

Joined: Jul 2006

Posts: 136

Likes: 0

From: Pittsburgh PA

Master Cylinder Question

About 18 months ago I started a body off frame restoration. Shortly before I started the project I put a new master cylinder in the car. I am almost done and will be driving in a few weeks (hopefully). Since the master cylinder has been sitting for 18 months, should I resue it?

thanks

Jun 21, 2009 | 02:05 PM

7T1vette

Team Owner

Joined: Jan 2006

Posts: 37,637

Likes: 3,118

From: Crossville TN

Has it been left dry (no brake fluid in it)? If so, just inspect it for rust. If it appears to be OK, just put some brake fluid in it and actuate it a few times to make sure the valve is still free to operate. If all that goes well, it should be fine to re-use.

Jun 21, 2009 | 02:49 PM

earthquake68

Drifting

Joined: Apr 2008

Posts: 1,565

Likes: 2

From: Sparta Mo.

Yup, you would be surprised how many years parts get stored on the shelf they call, "new". As long as the rear seal isn't leaking, I'd say you're good to go.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump