Adding shoulder guide holes
Thread Starter
Drifting
Joined: Mar 2007
Posts: 1,574
Likes: 155
Adding shoulder guide holes
I have a 75 vert with seats in almost new condition.
I want to add the shoulder belts for safety reasons and found the belts now I am looking for a reference.
Where can I send out the seat backs to have the passthroughs properly installed?
The seat covers and foams are perfect so I want someone who can do the install without totaling the seats.
Thanks in advance.
I want to add the shoulder belts for safety reasons and found the belts now I am looking for a reference.
Where can I send out the seat backs to have the passthroughs properly installed?
The seat covers and foams are perfect so I want someone who can do the install without totaling the seats.
Thanks in advance.
Team Owner
Joined: Sep 2006
Posts: 31,315
Likes: 4,418
From: Westminster Maryland
Hi K,
You can use the front trim plate as a guide to cut the front opening.
For the rear you'll need to buy the trim piece and the loosen the back of the seat cover so you can feel the location in the seat for the trim piece's screws. Once you install the trim piece you can cut the seat cover.
Regards,
Alan
You can use the front trim plate as a guide to cut the front opening.
For the rear you'll need to buy the trim piece and the loosen the back of the seat cover so you can feel the location in the seat for the trim piece's screws. Once you install the trim piece you can cut the seat cover.
Regards,
Alan
Pro
Joined: May 2006
Posts: 567
Likes: 5
From: bradenton fl
Team Owner
Joined: Aug 1999
Posts: 30,995
Likes: 99
From: Ontario
Team Owner
Joined: Jul 2004
Posts: 40,435
Likes: 793
From: Redondo Beach, California
Some comments:
Al Knoch has a lot of (all of?) the hardware associated with seats. Looking at his inventory it looks like he has stocks of a few things that the other corvette vendors don't have. For example, I wanted the seat back clips for a 69 that hold the shoulder belt to keep it from slipping. I had to work the used parts route to finally find a pair at about $200. I was later surprised to find Knoch has them readily available and apparently a lot cheaper. He doesn't advertise them in his catalog.
The little red plastic things that go on the end of the shoulder belts are called "T shirts" if you want to order them from Snake Oyl.
Cutting the leather to install the shoulder belts makes for a nervous job. A simple mistake and you've ruined your seats. To install the rear bezel (seatback) at first you don't know where to find the screw holes. Use a pick and gently push on the leather until you can feel them. For my 70, I bought the seat leather from Corvette Central and installed the leather covers my self. Looked great.
Al Knoch has a lot of (all of?) the hardware associated with seats. Looking at his inventory it looks like he has stocks of a few things that the other corvette vendors don't have. For example, I wanted the seat back clips for a 69 that hold the shoulder belt to keep it from slipping. I had to work the used parts route to finally find a pair at about $200. I was later surprised to find Knoch has them readily available and apparently a lot cheaper. He doesn't advertise them in his catalog.
The little red plastic things that go on the end of the shoulder belts are called "T shirts" if you want to order them from Snake Oyl.
Cutting the leather to install the shoulder belts makes for a nervous job. A simple mistake and you've ruined your seats. To install the rear bezel (seatback) at first you don't know where to find the screw holes. Use a pick and gently push on the leather until you can feel them. For my 70, I bought the seat leather from Corvette Central and installed the leather covers my self. Looked great.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Thread Starter
Drifting
Joined: Mar 2007
Posts: 1,574
Likes: 155
It seems like the cover will have to come off to do this correctly.
I contacted Wilcox to see if they can do it, if I send them my seats.
Once the bezels are installed does the shoulder belt simply contort itself through the opening or does the shoulder belt itself have to come apart some how?
I contacted Wilcox to see if they can do it, if I send them my seats.
Once the bezels are installed does the shoulder belt simply contort itself through the opening or does the shoulder belt itself have to come apart some how?
Team Owner
Joined: Sep 2006
Posts: 31,315
Likes: 4,418
From: Westminster Maryland
Hi K,
The plastic 'sleeve' needs to come off the shoulder belt to get the belt through the seat.
You can do that by warming the 'sleeve' with a hair dryer or in some hot water so it slides over the 'tongue' on the belt end.
Good luck!
Regards,
Alan
The plastic 'sleeve' needs to come off the shoulder belt to get the belt through the seat.
You can do that by warming the 'sleeve' with a hair dryer or in some hot water so it slides over the 'tongue' on the belt end.
Good luck!
Regards,
Alan
Thread Starter
Drifting
Joined: Mar 2007
Posts: 1,574
Likes: 155
