She's pretty hot 
ebay ebad
Thread Starter
Melting Slicks
Joined: Jun 2005
Posts: 2,293
Likes: 6
From: North of the Bay California
ebay ebad
item #260764337469
thanks for linking that.
Check this out and please help me answer this puzzle
Did someone graft a complete front end and rear section on a chrome bumper car....or stuff all the interior of a 72 into a late C3?......but the engine bay looks older than 74
Too gross to care.
http://cgi.ebay.com/ebaymotors/ws/eB...%3D1&viewitem=
Here's a link so you dont have to chase listing numbers...
http://cgi.ebay.com/ebaymotors/ws/eB...%3D1&viewitem=
Here's a link so you dont have to chase listing numbers...
Check this out and please help me answer this puzzle
Did someone graft a complete front end and rear section on a chrome bumper car....or stuff all the interior of a 72 into a late C3?......but the engine bay looks older than 74
Last edited by blueray72; Apr 20, 2011 at 12:51 AM.
Administrator
Joined: Jul 2000
Posts: 53,982
Likes: 6,211
From: About 1100 miles from where I call home.
Too gross to care.
http://cgi.ebay.com/ebaymotors/ws/eB...%3D1&viewitem=
Here's a link so you dont have to chase listing numbers...
http://cgi.ebay.com/ebaymotors/ws/eB...%3D1&viewitem=
Here's a link so you dont have to chase listing numbers...
Race Director
Joined: Jul 2000
Posts: 16,509
Likes: 2,399
From: Out Where the Buses Don't Run, Eglin AFB/ Niceville FL
2025 C8 Z06/7/E-Ray of the Year Finalist - Unmodified
2022 Corvette of the Year Finalist -- Modified
2021 C6 of the Year Winner - Modified
2020 C7 of the Year Finalist -- Modified
2020 C6 of the Year Finalist - Modified
It appears that the body panels were replaced. The trim tag shows it as originally being Ontario Orange with a saddle vinyl interior and that would be a correct combo for 72.
I had to laugh at the dry, no rust comment as everything chrome has surface rust on it.
I had to laugh at the dry, no rust comment as everything chrome has surface rust on it.
Safety Car
Joined: Jun 2004
Posts: 4,652
Likes: 80
From: Lakeland Florida
There is a lot of things that need to be repaired for that price. The ad says door panels in good original condition. The passenger side is in poor condition.
And you better buy it soon. Did you see the rubber fuel hose almost touching the header? They used the wire loom to feed the fuel line through and route it around the exhaust. I wonder how long before it gets soft and melts.
kdf
And you better buy it soon. Did you see the rubber fuel hose almost touching the header? They used the wire loom to feed the fuel line through and route it around the exhaust. I wonder how long before it gets soft and melts.
kdf
Thread Starter
Melting Slicks
Joined: Jun 2005
Posts: 2,293
Likes: 6
From: North of the Bay California
There is a lot of things that need to be repaired for that price. The ad says door panels in good original condition. The passenger side is in poor condition.
And you better buy it soon. Did you see the rubber fuel hose almost touching the header? They used the wire loom to feed the fuel line through and route it around the exhaust. I wonder how long before it gets soft and melts.
kdf
And you better buy it soon. Did you see the rubber fuel hose almost touching the header? They used the wire loom to feed the fuel line through and route it around the exhaust. I wonder how long before it gets soft and melts.
kdf
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
CF Community Team
Joined: Oct 2004
Posts: 19,365
Likes: 5,244
From: Cape Cod, Mass.
2025 C6 of the Year Finalist - Unmodified
2025 C8 Z06/7/E-Ray of the Year Finalist - Unmodified
2023 C3 of the Year Finalist - Unmodified
2021 C8 of the Year Finalist Unmodified
2020 Corvette of the Year Finalist (performance mods)
2019 C1 of Year Winner (performance mods)
2017 Corvette of the Year Finalist
2016 C2 of Year
2015 C3 of Year Finalist
Barbie looks good though 
Burning Brakes
Joined: Jul 2004
Posts: 870
Likes: 2
From: Closter New Jersey
it has the potential to look ok. ditch the hood for a stocker or an l88, fix the license plate placement on the rear bumper(why the hell would anyone put that between the taillights?), paint, clean up the interior and it could be a decent looking custom. entirely not worth the effort, but it could be
p.s. barbie does look pretty good
p.s. barbie does look pretty good
Pro
Joined: Sep 2010
Posts: 745
Likes: 66
From: Hutto Texas
Why does it have to be PINK??? Looked like a decent car other than the color. Agreed, the accompanying female makes it somewhat easier to look at. Too bad she is not up for auction.
Last edited by Hardway; Apr 20, 2011 at 12:38 PM.
Advanced
Joined: Jan 2008
Posts: 61
Likes: 0
From: Knoxville TN
It's still showing up for me.
Try going directly to www.ebay.com, then search for item # 260764337469.
-Brian
Try going directly to www.ebay.com, then search for item # 260764337469.
-Brian
Melting Slicks
Joined: Jul 2009
Posts: 3,264
Likes: 3
From: Vero Beach FL
There is a lot of things that need to be repaired for that price. The ad says door panels in good original condition. The passenger side is in poor condition.
And you better buy it soon. Did you see the rubber fuel hose almost touching the header? They used the wire loom to feed the fuel line through and route it around the exhaust. I wonder how long before it gets soft and melts.
kdf
And you better buy it soon. Did you see the rubber fuel hose almost touching the header? They used the wire loom to feed the fuel line through and route it around the exhaust. I wonder how long before it gets soft and melts.
kdf
Team Owner
Joined: Jun 2000
Posts: 38,923
Likes: 1,482
From: Southbound
Cruise-In II Veteran
Sorry folks, but I'm betting Barbie has a Ken.
Thread Starter
Melting Slicks
Joined: Jun 2005
Posts: 2,293
Likes: 6
From: North of the Bay California
Terrorizing Orange Cones
Joined: Oct 2007
Posts: 2,572
Likes: 17
From: Northern CO
There's always a Ken and even if she swings both ways, certainly the best part of this particular sell.
I get queasy when I see a full bumper car without them (unless it's a bona fide racer) and this one, ain't.
I get queasy when I see a full bumper car without them (unless it's a bona fide racer) and this one, ain't.
Racer
Joined: Feb 2011
Posts: 257
Likes: 1
has anyone figured out what all years of body parts are involved there?
I'm still having a really hard time, as its almost like there isn't one whole body panel that is beholden to coming from a single year
my guess on the years of parts
I think I got them all...oh, yeah, and that hood is almost an exact copy of the one from the Corvette Summer movie
I'm still having a really hard time, as its almost like there isn't one whole body panel that is beholden to coming from a single year
my guess on the years of parts
I think I got them all...oh, yeah, and that hood is almost an exact copy of the one from the Corvette Summer movie
Last edited by T Rush; Apr 20, 2011 at 05:49 PM.
