When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Finally got the courage to start preping my 81 vette for paint. i will post some pictures. i would like some tips and help. sore fingers already i taking off 3 layers of paint with razor blade, easier then i expected . i am trying to put pictures up dont know how, i have the pictures in my forum page, cant get them on thread
Look around at the stickies in each section... there's one somewhere here on how to post pic. Basically, they need to be hosted on the 'Net somewhere, then cut and pasted to your thread. Itis free and simple once you get the hang of it, but "self posting" like on Craigslist is available only to paid "supporting members".
Photobucket. Set up a free account and upload pics to it first and then copy and paste the image link here. If you post more than one image on here be sure to move the curser to the left margin under the first link so the pictures will be inline and not side by side
on my hood there was what i call a spider crack, it spread out in different ways about an 1 1/2 wide. i scraped layers of paint off and found some patch but most not have been fixed right. what the best way to fix. it seems deep
Looking good. A lot of curves on these cars make sure you don't sand the tops (crowns) of the fender/surround off. I have found Dura Blocks in various shapes really helpful.
You have already accomplished in a little over a week what it took me over a year to do!!! You get the Hardest Worker of CF award... best of luck with the remainder of the job and be careful with the sander...