Putting it back together.... A lil help needed
Thread Starter
Advanced
Joined: Feb 2013
Posts: 63
Likes: 0
Putting it back together.... A lil help needed
Hey everyone,
Car is finally painted and started to put things back together. Finally after 4 months of waiting. Interior almost complete.
For giggles I decided to mock the rear bumper. All the mounting holes line up but I noticed on either side there isn't enough bumper the cover the sides of the rear. A few mm off on each side. Is there something i'm missing here? I took a few pics. Any help or guidence is appreciated
The bumper was not on the car when I bought it
Car is finally painted and started to put things back together. Finally after 4 months of waiting. Interior almost complete.
For giggles I decided to mock the rear bumper. All the mounting holes line up but I noticed on either side there isn't enough bumper the cover the sides of the rear. A few mm off on each side. Is there something i'm missing here? I took a few pics. Any help or guidence is appreciated
The bumper was not on the car when I bought it
Team Owner
Joined: Jun 2000
Posts: 38,923
Likes: 1,482
From: Southbound
Cruise-In II Veteran
You may be okay once the retainers and related hardware are in place and you get to mounting the bumper cover. You have to finesse bumper covers a little. Is your cover urethane or fiberglass?
Thread Starter
Advanced
Joined: Feb 2013
Posts: 63
Likes: 0
Thanks for the reply..... The bumper is a urethane. I ordered the retainers today so hopefully that hepls
