Fastener Sizes?
Thread Starter
Old Fart Pilot
Joined: Apr 2010
Posts: 1,920
Likes: 990
From: Spokane, WA
Fastener Sizes?
OK guys, if I have a part number from the '71 AIM, where do I go to find out what the specifics for the actual fastener are (length, diameter, thread pitch, etc) so I can buy replacements?
Still Learning...
Paul
Still Learning...
Paul
Team Owner
Joined: Sep 2006
Posts: 31,270
Likes: 4,362
From: Westminster Maryland
Hi Paul,
Another good source, especially for the 68-72 chassis and running gear fastener specifics, is the "Corvette Chassis Restoration Guide" by Joseph Tripoli, Jr..
Although this guide was first published in 1989 I see it's still available from various vendors for around $24.
I refer to it quite often.
Regards,
Alan
Another good source, especially for the 68-72 chassis and running gear fastener specifics, is the "Corvette Chassis Restoration Guide" by Joseph Tripoli, Jr..
Although this guide was first published in 1989 I see it's still available from various vendors for around $24.
I refer to it quite often.
Regards,
Alan
Racer
Joined: Jun 2008
Posts: 270
Likes: 10
From: Macon Georgia
Thread Starter
Old Fart Pilot
Joined: Apr 2010
Posts: 1,920
Likes: 990
From: Spokane, WA
Hi Paul,
Another good source, especially for the 68-72 chassis and running gear fastener specifics, is the "Corvette Chassis Restoration Guide" by Joseph Tripoli, Jr..
Although this guide was first published in 1989 I see it's still available from various vendors for around $24.
I refer to it quite often.
Regards,
Alan
Another good source, especially for the 68-72 chassis and running gear fastener specifics, is the "Corvette Chassis Restoration Guide" by Joseph Tripoli, Jr..
Although this guide was first published in 1989 I see it's still available from various vendors for around $24.
I refer to it quite often.
Regards,
Alan
I really appreciate all the help you fellow forum members provide
Paul
