Indicator lens - how to replace?
#1
Burning Brakes
Thread Starter
Indicator lens - how to replace?
How do you get this in? Its new to replace a missing one. The back is sealed and I thought I'd ask. It does not just simply slide in from the front either.
#2
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,469 Likes
on
1,248 Posts
Cruise-In II Veteran
Installs in a plastic housing and mounts from the rear of the center cluster.
Last edited by Easy Mike; 02-28-2016 at 09:51 AM.
#5
Burning Brakes
Thread Starter
Sorry for the lack of pics...I know it always helps, but I've been super busy. I'll give it a try and report back!
#6
Dementer sole survivor
Member Since: Oct 2015
Location: YUPPY HELL Westford MASS
Posts: 16,446
Received 6,295 Likes
on
3,920 Posts
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
Previous owner may have used silicone. Try using a razor to clean off the outside so you can see the seam. Then use a utilityknife, box cutter to get into the seam and pry it apart. Be careful not to cut the plastic.
Good luck
Good luck