paint for gauge bezel and shift plate
#1
paint for gauge bezel and shift plate
anyone have suggestion on what brand paint to put on gauge bezel and shift plate...supposed to be semi gloss...painted once and was too shiny...need suggestions from happy user...thanks
#2
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,469 Likes
on
1,248 Posts
Cruise-In II Veteran
Old formula Krylon 5-ball semi flat black. It's available through industrial coatings outlets, eBay, and Corvette aftermarket providers.
Last edited by Easy Mike; 03-09-2018 at 02:57 PM.
#3
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi 68,
Here's the current appearance of the Krylon #1613 paint semi-flat black.
It's acrylic lacquer so it's thin but covers well.
Whatever you're painting must be scrupulously clean.
Do not confuse it with Krylon #51613 which isn't acrylic lacquer.
Some people feel it's a good choice for interior hard parts that were painted black.
Regards,
Alan
This what you should be looking for if you decide to use Krylon 1613.
Here's the current appearance of the Krylon #1613 paint semi-flat black.
It's acrylic lacquer so it's thin but covers well.
Whatever you're painting must be scrupulously clean.
Do not confuse it with Krylon #51613 which isn't acrylic lacquer.
Some people feel it's a good choice for interior hard parts that were painted black.
Regards,
Alan
This what you should be looking for if you decide to use Krylon 1613.
#6
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
The following users liked this post:
calwldlife (03-09-2018)
#7
Looks real good to me Chuck.
R
Last edited by SB64; 03-09-2018 at 06:45 PM.
The following users liked this post:
chazde3 (03-09-2018)
#8
Team Owner
J-D Blitz Black for me. Satin black..same sheen as semi-FLAT black. Of recent years, I have not been happy with Krylon paint. Just sayin'....