Hello From Germany
Then there is the big clean up, so it shines again and is ready for spring. I'm very excited ...
Unfortunately for the pickup a wheel bearing must be renewed, before I lose the wheel still!
Greetings from Germany, Stefan
the next trip will be something very special!
At Whitsun it's 350km to Suhl in Thuringia (Germany) for the 13th International Corvette-Club Pentecost Meeting!
So far 242 Corvettes are registered!
We are here for the first time this year and will certainly have our fun.
Photos are taken anyway!
More Info here: http://www.corvetteforum.de/showthread.php?tid=92379
Greatings from germany, Stefan
http://www.corvetteforum.de/showthread.php?tid=58983
Greatings from germany, Stefan
Last edited by meStefan; Apr 11, 2018 at 02:01 AM.
now I drove the bitch from the workshop, fully fueled and already the next part is broken!
No turn signals go, the power windows do not budge ...
Fuse has flown out and the turn signal relay has left.
Short to the turn signal front passenger side.
New fuse and turn signal relay purely then everything goes back, just do not blink to the right!
Blinkerbirne and plug seem ok, must be due to the wiring.
Maybe someone has a tip, if there is still another component between the turn signal relay and turn signals that causes the short circuit?!?
Do not have time to look clothes today.
Maybe she looks different today?!?
And adjusting the carburetor has also reanimated a few more horses! Yeeah!
Go like knife's the little one!












