fuel tank
Thread Starter
Heel & Toe
Joined: Aug 2018
Posts: 21
Likes: 0
From: Honolulu, Hi
fuel tank
I have a 1976 corvette. I pull the fuel tank out. Because there was rust in the tank and under the bladder, I pull it out also. I put the bladder in the trash. I bought a new fuel tank with no bladder. The new fuel tank does not have a retaining ring and not threads in the hole to secure the sending unit.
This is my problem
Can someone please tell me how I can secure the sending unit to the tank?
Can someone please tell me where I can get a fuel tank bladder?
thank you,
This is my problem
Can someone please tell me how I can secure the sending unit to the tank?
Can someone please tell me where I can get a fuel tank bladder?
thank you,
Race Director
Joined: Apr 2009
Posts: 19,294
Likes: 2,754
From: Charlotte NC
You needed to re-use the ring off the old bladder. No one I know if makes these bladders. You may need to become inventive adn use slid on clips and machine screws and a rubber gasket you can cut out of some flat rubber.
DUB
DUB
