rally wheels
#3
Team Owner
Member Since: Feb 2003
Location: Sitting in his Nowhere land Hanover Pa
Posts: 49,015
Received 6,945 Likes
on
4,784 Posts
2015 C2 of Year Finalist
I could never pull them off with my fingers. I take a flat blade screwdriver and wrap a rag around it I just pry and pop them off. 68 wheels are 15x7 and 69-82 are 15x8
#4
Safety Car
Just curious... what makes you think they are early rally wheels? Rally wheels were standard on a 76, the aluminum were a $300 option.
#5
Team Owner
There are 3 "tabs" which pop onto the wheel and which hold it. My method is to use the 4 fingers (no thumbs!) of each hand to grab onto the outer rim of the center cap and pull it away from the wheel. After pulling one area of the center cap about 1/8" from the wheel, it will pop off the wheel. To put it back on, make sure that 2 of the 3 'tabs' are engaged with the wheel and use your palm to pop the 3rd tab into place. Don't use any hard metal tools to remove or install the cap. If you need to pry it off, use a wide plastic tool to spread the force on the cap. To install, use a rubber mallet and use as LITTLE force as possible to get it to engage.
The following users liked this post:
Bills17n72 (02-04-2019)