Deep jack compartment tray
Thread Starter
Former Vendor
Joined: Jan 2000
Posts: 5,593
Likes: 631
From: Brighton
CF Community Team
Joined: Mar 2007
Posts: 9,328
Likes: 359
From: Delaware
St. Jude Donor '25
Hi Tom,
Not the notch ( yes there is a notch in 68 and is there in the photo). I am talking about an indentation that runs down what would be the front of the tray. 68 (your photo is a 68 only) did not have that. 69 and up did. Take a look at the CAD pics you posted. That "vertical indentation" on the front wall is for 69 and later.
Not the notch ( yes there is a notch in 68 and is there in the photo). I am talking about an indentation that runs down what would be the front of the tray. 68 (your photo is a 68 only) did not have that. 69 and up did. Take a look at the CAD pics you posted. That "vertical indentation" on the front wall is for 69 and later.
Last edited by avalonjohn; Apr 11, 2019 at 12:04 PM.
Thread Starter
Former Vendor
Joined: Jan 2000
Posts: 5,593
Likes: 631
From: Brighton
Hi Tom,
Not the notch ( yes there is a notch in 68 and is there in the photo). I am talking about an indentation that runs down what would be the front of the tray. 68 (your photo is a 68 only) did not have that. 69 and up did. Take a look at the CAD pics you posted. That "vertical indentation" on the front wall is for 69 and later.
Not the notch ( yes there is a notch in 68 and is there in the photo). I am talking about an indentation that runs down what would be the front of the tray. 68 (your photo is a 68 only) did not have that. 69 and up did. Take a look at the CAD pics you posted. That "vertical indentation" on the front wall is for 69 and later.
