When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
David sorry to be a pain. Post has been deleted But could you remove me from the front tow plate and add me to the Easy-Jack front cross member jacking plate kit. I prefer the “clean” look. Could you add me to the C-3 Easy-Jack front cross member jacking plate kit list please.
Thanks Ike
Last edited by general ike; Dec 14, 2021 at 08:26 AM.
Here is another item I’ll put up to Pay it Forward.
This is a new, still in the original wrapping, never used or installed Quick Fuel Technology, billet aluminum, adjustable, fuel pressure regulator.
Holley part number: 30-1803QFT.
Old Car Bum, I’d like to claim your fuel pressure regulator if no one else has laid claim to it.
Greg
This is such an awesome thread and I never knew this forum had it each year. So here we go. I’m putting up this wiper rat nest cover for cars with long hoods. I believe 73’s on. Cars without the wiper door.
Merry Christmas
Happy New Year everyone!
Taking this item off since no one showed interest. Maybe next year.
Last edited by Bluesting70; Dec 31, 2021 at 11:49 PM.
I have a very nice set of seat tracks for ONE seat that came out of a 77 vette.
I purchased this set from another forum member on here with the intention of modifying the track mounts to fit my 74.
However, I located a full set that is a direct replacement for my 74, so the 77 tracks I’m offering up are unmolested and are fully operational.
My loss is your gain. I’m offering up this very nice OEM set in the hopes that someone else can use them and they don’t collect dust on a shelf in the basement.
Free shipping to the conus or 50/50 split shipping outside of the US.
Merry Christmas to all!!
David, I’d like my name out in the hat for a rear tow plate. I had purchased one of your front plates earlier this year and was extremely pleased with the quality.
I am swapping my OEM rear spring with a composite spring and would like to try your rear tow bracket.
Thanks for considering me!
Merry Christmas!
David sorry to be a pain. Post has been deleted But could you remove me from the front tow plate and add me to the Easy-Jack front cross member jacking plate kit. I prefer the “clean” look. Could you add me to the C-3 Easy-Jack front cross member jacking plate kit list please.
I have a set of headlight bulb retainer cups (sort of). I originally needed just the right hand inner cup so I ordered just that one. When I received it, it turned out to be mislabeled and was actually for the left hand inner. My wife then ordered a complete set just to make sure we'd get the one we needed. I used that one RH inner cup from the new set so I'm left with the RH and LH outers and two LH inners. Let me know if anyone could use any or all of these.
Edit: I actually found a fifth one, this last one is for the LH Outer position, so I have one RH Outer, two LH Outers, and two LH inners. This last LH Outer is the one that was originally on my car in the wrong position so it's used and a bit dirty but usable. Looking at it, I think it's actually not a Corvette specific piece because the back has a round hole rather than the diamond shape of the correct ones. All the mounting points are identical to the correct one though so it should work fine. I'm guessing it's a junkyard part from some other GM vehicle.
Last edited by gdl2165; Dec 16, 2021 at 09:25 PM.
Reason: Adding another part to the list
I have a set of headlight bulb retainer cups (sort of). I originally needed just the right hand inner cup so I ordered just that one. When I received it, it turned out to be mislabeled and was actually for the left hand inner. My wife then ordered a complete set just to make sure we'd get the one we needed. I used that one RH inner cup from the new set so I'm left with the RH and LH outers and two LH inners. Let me know if anyone could use any or all of these.
Edit: I actually found a fifth one, this last one is for the LH Outer position, so I have one RH Outer, two LH Outers, and two LH inners. This last LH Outer is the one that was originally on my car in the wrong position so it's used and a bit dirty but usable. Looking at it, I think it's actually not a Corvette specific piece because the back has a round hole rather than the diamond shape of the correct ones. All the mounting points are identical to the correct one though so it should work fine. I'm guessing it's a junkyard part from some other GM vehicle.
I'll be changing out my front headlights and rebuilding them so these would work great for me Gary whatever you have. I'd like to put my name down for them please. Thank you and best regards, David
CLAIMED 12-22 I have a nice under hood light from my 77 with the on-off switch. Its clean, complete, and works fine.
Fair warning though: Sooner or later you WILL have a crescent moon scar on your head.....and it stings.
Adding a couple more items to the list. My wife somehow ordered two ashtrays for our 71 so I have this extra. Also these are the original seatbelts out of the 71. They're dirty, the lap belt buckles are rusted and frozen but could probably be cleaned. The shoulder belts reel in and out just fine and seem to be in pretty good shape.
Adding a couple more items to the list. My wife somehow ordered two ashtrays for our 71 so I have this extra. Also these are the original seatbelts out of the 71. They're dirty, the lap belt buckles are rusted and frozen but could probably be cleaned. The shoulder belts reel in and out just fine and seem to be in pretty good shape.
If still available, would like to claim the seat belts, please.
