C3 Hoods
Safety Car
Joined: May 2004
Posts: 4,351
Likes: 1,579
From: los altos hills california
Good catch ignatz! was planning to but decided to go crate engine. Supplier in Vancouver B.C. Built one with roller cam, vortec heads, etc. Says he's sold 17 to c3 owners over the past 24 months, no issues. i figure they switched intake supplier/model.
So looking for hood. Previous post suggested ACI. Seems to have good rep. 4-5 hour drive from home. I mean who wouldn't want to go to Toledo in the summer?
Thanks,
peter
So looking for hood. Previous post suggested ACI. Seems to have good rep. 4-5 hour drive from home. I mean who wouldn't want to go to Toledo in the summer?
Thanks,
peter
Thread Starter
Heel & Toe
Joined: Mar 2019
Posts: 23
Likes: 1
From: Guelph, Ontario
Thanks,
As I write not sure what intake engine builder included. They removed identification. Expect an Edelbrock. Vortec heads seems to be part of problem. Have a 2101 on existing engine, worked well. Will look into Performer.
As I write not sure what intake engine builder included. They removed identification. Expect an Edelbrock. Vortec heads seems to be part of problem. Have a 2101 on existing engine, worked well. Will look into Performer.
