When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
hi all, could anybody give me the best suspension alignment numbers (toe/etc) for a C3 with the following characteristics:
SB engine lighter then stock (alu heads/etc)
lightened by about 400 lbs
rear lightweight spring
front transverse spring kit
polybushing all round
HD sways bars front rear
10'' rear bolts
adjustable QA1 all round round shocks
275/60/15 rear and 255/60/15 front rubber
hi all, could anybody give me the best suspension alignment numbers (toe/etc) for a C3 with the following characteristics:
SB engine lighter then stock (alu heads/etc)
lightened by about 400 lbs
rear lightweight spring
front transverse spring kit
polybushing all round
HD sways bars front rear
10'' rear bolts
adjustable QA1 all round round shocks
275/60/15 rear and 255/60/15 front rubber
I agree that the advanced street set up is a good place to start. Run as much positive caster as you can get. They recommend 2.75 but if you can get more then do it. The zero toe will be a little twitchy so if you don't like that then put a slight amount of toe-in in. The rear toe is very important for high speed stability. Those numbers are good as well.