Carb question
Thread Starter
Burning Brakes
Joined: Aug 2005
Posts: 751
Likes: 0
From: Lufkin Texas
Carb question
HAve the crate motor looking for a good square bore carb holley, barry grant edelbrock etc. My question is how does the transmission passing gear linkage hook up to a non stock carb? Is there some adapter I need? Thanks
Tech Contributor
Joined: Aug 1999
Posts: 14,379
Likes: 6,390
From: At my Bar drinking and wrenching in Lafayette Colorado
All the aftermarket carbs have holes in the throttle lever for attachment of the TH350 kickdown cable. Transfer the attach lug from the Q-Jet to the new carb and re-set the cable adjustment.
Thread Starter
Burning Brakes
Joined: Aug 2005
Posts: 751
Likes: 0
From: Lufkin Texas
Originally Posted by lars
All the aftermarket carbs have holes in the throttle lever for attachment of the TH350 kickdown cable. Transfer the attach lug from the Q-Jet to the new carb and re-set the cable adjustment.
Melting Slicks
Joined: Dec 2002
Posts: 2,342
Likes: 2
From: Dayton Area Ohio
St. Jude Donor '08
Originally Posted by lars
All the aftermarket carbs have holes in the throttle lever for attachment of the TH350 kickdown cable. Transfer the attach lug from the Q-Jet to the new carb and re-set the cable adjustment.
I'm in the process of switching from the Qjet to an Edelbrock.
