Engine & Tranny Help
Thread Starter
Racer
Joined: Feb 2005
Posts: 399
Likes: 0
From: wharton tx
Engine & Tranny Help
My 350 Motor Just Blew Up OUT OF MY 78 VETTE, I Have A Spare 1988 Chevy 350 With Centerbolt Valve Covers Out Of A Pickup That Now Has A Carb On It.
My Question Is
1. Would The Motor Bolt Right Up ? My Car Is A 78 4spd Borg Warner Tranny
2.would The Flywheel And Starter Just Bolt Right Up
3. The 88 Motor Was An Auto, So I Would Need To Put A Roller Input Bearing
4. Anything I Need To Watch Out For I Just Want To Have My Car Running While I Rebuild The Original Motor.
My Question Is
1. Would The Motor Bolt Right Up ? My Car Is A 78 4spd Borg Warner Tranny
2.would The Flywheel And Starter Just Bolt Right Up
3. The 88 Motor Was An Auto, So I Would Need To Put A Roller Input Bearing
4. Anything I Need To Watch Out For I Just Want To Have My Car Running While I Rebuild The Original Motor.
