rear end help

Reply Subscribe

Thread Tools

Search this Thread

May 28, 2007 | 11:35 PM

brngrhd

Thread Starter

Racer

Joined: Apr 2007

Posts: 364

Likes: 1

From: Dane Wisconsin

rear end help

ok i have been reading a ton on rear ends because i just broke mine. when i look under the car with it in gear the left axle turns and the car does not move so i guess i broke the left outer axle. what should i do to help keep this from happening again? is this a common thing to break? will parts at the top of this page fit right in http://www.tomsdifferentials.com/catalog.asp?pg=23 should i just buy new stock ones?

help please.

May 29, 2007 | 12:31 AM

AzMotorhead

Limping across the line

Joined: Oct 2002

Posts: 5,299

Likes: 109

From: Peoria Az

If you indeed did snap your outer axle you will have to rebuild that spindle assy.
Best thing to do is tear it apart first then determine all the parts you'l need.

May 29, 2007 | 09:30 AM

brngrhd

Thread Starter

Racer

Joined: Apr 2007

Posts: 364

Likes: 1

From: Dane Wisconsin

Quote:

Originally Posted by pmullaly

If you indeed did snap your outer axle you will have to rebuild that spindle assy.
Best thing to do is tear it apart first then determine all the parts you'l need.

thanks i'm pretty sure that it did break since that axle turns and the car does not move. is this a comon failure?

May 29, 2007 | 06:58 PM

brngrhd

Thread Starter

Racer

Joined: Apr 2007

Posts: 364

Likes: 1

From: Dane Wisconsin

when you say rebuild that assembly what are we talking about here can't i pull the brakes off remove the old broke axle install the new one? is this a common failure?

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump