Need O Ring Size
Melting Slicks
Joined: Feb 1999
Posts: 2,473
Likes: 10
From: New Paltz, New York USA
Not sure about your tranny, but on my 81 I used a number 13 O ring purchased from Home Depot. just check in their screw section. They came 6 in a plastic bag for about $2.00 and it worked great.
Thread Starter
Pro
Joined: Oct 2003
Posts: 707
Likes: 18
From: Reinholds PA
Melting Slicks
Joined: Jan 2007
Posts: 2,589
Likes: 5
From: Salisbury Maryland
Would that be a 013 or 113?
You can also get them at your local Applied Industrial Technologies or other PT distributor.
They're really good for wheel bearings, seals, and tools like pullers etc. They even sell Craftsman, Gearwrench, Armstrong, Allen, Irwin(Vise-Grips) and Ingersoll-Rand air tools too!
You can order it on-line even, and have it shipped to your door via UPS if you go to www.applied.com
Shop rags, safety glasses, CRC and Rustoleum aerosols, 3M abrasives and tapes(for bodywork), and of course Loctite!
You can also get them at your local Applied Industrial Technologies or other PT distributor.
They're really good for wheel bearings, seals, and tools like pullers etc. They even sell Craftsman, Gearwrench, Armstrong, Allen, Irwin(Vise-Grips) and Ingersoll-Rand air tools too!
You can order it on-line even, and have it shipped to your door via UPS if you go to www.applied.com
Shop rags, safety glasses, CRC and Rustoleum aerosols, 3M abrasives and tapes(for bodywork), and of course Loctite!
