Rebuilding Engines
Le Mans Master
Joined: Apr 2005
Posts: 6,355
Likes: 425
From: Seattle Area WA
Too many to list.
There is the Lingenfelter small block chevy book, Various Vizard building books, "Max Perf On a budget", "big inch small blocks", etc, Smokey Yunick's book. Just pick from the list.
http://www.amazon.com/s/ref=nb_ss_gw...lock&x=20&y=22
There is the Lingenfelter small block chevy book, Various Vizard building books, "Max Perf On a budget", "big inch small blocks", etc, Smokey Yunick's book. Just pick from the list.
http://www.amazon.com/s/ref=nb_ss_gw...lock&x=20&y=22
Instructor
Joined: Aug 2002
Posts: 240
Likes: 1
From: In the drivers seat of a Corvette In Ks
Race Director
Joined: Sep 2002
Posts: 10,362
Likes: 5
From: San Diego - Deep Within The State of CONFUSION!
Don't know if it's even still in print, but I still follow the basic tips now after all these years. I've learned a lot over the years since, but that book is a great building block.
Drifting
Joined: Oct 2007
Posts: 1,458
Likes: 1
From: Collinsville MS
St. Jude Donor '08
The one I read that gave me LOTs of valuable info years ago, was entitled "How to Hot Rod a Small Block Chevy."
Don't know if it's even still in print, but I still follow the basic tips now after all these years. I've learned a lot over the years since, but that book is a great building block.
Don't know if it's even still in print, but I still follow the basic tips now after all these years. I've learned a lot over the years since, but that book is a great building block.
I built my first engine using this book, very helpful. step by step how to's.
Another good one is "small block chevy performance" vol 1 and 2
