Distributor Orientation
Thread Starter
Racer
Joined: Jul 2005
Posts: 420
Likes: 0
From: Yerington NV
REALLY got it this time
So after being told what a dumb**** I am ...... I woke up, put my "gear" on and went back "in" ....
Put the distrib gear back on the correct way, dimple towards rotor pin!
Messed with the oil slot a little and down she went, where #2 plug WAS, (now #1 plug wire) ... Wasn't a real big deal, as I had plenty of wire to reach all the pins (maybe I knew I would need them?
)... I have an MSD 8501 being delivered today, so I will wait to check timing until I get those installed.
Now off to play some tennis
I can concentrate now ......
Put the distrib gear back on the correct way, dimple towards rotor pin!
Messed with the oil slot a little and down she went, where #2 plug WAS, (now #1 plug wire) ... Wasn't a real big deal, as I had plenty of wire to reach all the pins (maybe I knew I would need them?
)... I have an MSD 8501 being delivered today, so I will wait to check timing until I get those installed.Now off to play some tennis
I can concentrate now ......
