Wheel Alignment
Thread Starter
Drifting
Joined: Mar 1999
Posts: 1,432
Likes: 22
From: Oxford CT
Wheel Alignment
I am going to attempt my own alignment after a suspension rebuild.
My question is which is first, the front or the rear? The first thing I am going to do is find the center line of the car and work from there.
My question is which is first, the front or the rear? The first thing I am going to do is find the center line of the car and work from there.
Racer
Joined: May 2007
Posts: 285
Likes: 0
From: Ga.
Go to this site and review all alignment articles. Hope this helps!
http://wiki.corvettefaq.com/index.php?title=Main_Page
http://wiki.corvettefaq.com/index.php?title=Main_Page
Instructor
Joined: Oct 2007
Posts: 183
Likes: 1
From: Philmont NY
Melting Slicks
Joined: Sep 2003
Posts: 2,114
Likes: 33
From: ct
Bob. Why go through the trouble. Sardos in Ansonia dose all of mine. Paul just did my 64 this past monday and he has my 66 right now. He's the only one around here that knows what to do with them. Now if your rear TA bolts are rusted then you may what to take care of that first. Just thought I would make the suggestion. Brian G. From Autoworks in Seymour.
Thread Starter
Drifting
Joined: Mar 1999
Posts: 1,432
Likes: 22
From: Oxford CT
Bob. Why go through the trouble. Sardos in Ansonia dose all of mine. Paul just did my 64 this past monday and he has my 66 right now. He's the only one around here that knows what to do with them. Now if your rear TA bolts are rusted then you may what to take care of that first. Just thought I would make the suggestion. Brian G. From Autoworks in Seymour.
Have you created anything new over the winter? I'm starting the Hvnly Donute cruise night on the 16th.
Racer
Joined: Aug 2000
Posts: 434
Likes: 3
From: Cleveland Ohio
Melting Slicks
Joined: Jan 2004
Posts: 3,247
Likes: 210
From: Detroit MI
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Sep 2003
Posts: 2,114
Likes: 33
From: ct
Brian....Thanks for the advice..another fellow I know recommended them too, so it looks like there the ones.
Have you created anything new over the winter? I'm starting the Hvnly Donute cruise night on the 16th
I'm building a roadrace clone. It is very much like the Owens Corning car. Don was down my shop last week. He needs Eric to do some work on his car. I'll see you at the donut. Brian G.
Thread Starter
Drifting
Joined: Mar 1999
Posts: 1,432
Likes: 22
From: Oxford CT
Bob. Why go through the trouble. Sardos in Ansonia dose all of mine. Paul just did my 64 this past monday and he has my 66 right now. He's the only one around here that knows what to do with them. Now if your rear TA bolts are rusted then you may what to take care of that first. Just thought I would make the suggestion. Brian G. From Autoworks in Seymour.
Took your advice...dropped the car off today.
