Door spring help
Thread Starter
Advanced
Joined: Dec 2006
Posts: 99
Likes: 0
Door spring help
Is it possible to replace the driver door hinge spring without taking the door off? I put new springs on with the doors off the car and now the drivers side has poped out of postion. This job was a piece of cake with the doors off.
Race Director
Joined: May 2006
Posts: 16,528
Likes: 53
From: Dayton, Ohio
Yes but there is a tool you need or will have to make.Just be very careful because its easy to chip the door edge.
edit- http://willcoxcorvette.com/product_i...ducts_id=25646
edit- http://willcoxcorvette.com/product_i...ducts_id=25646
Intermediate
Joined: Oct 2005
Posts: 42
Likes: 0
From: Saratoga Springs UT
Check this out:
https://www.corvetteforum.com/techti...D=67&TopicID=3
You will need a special tool which is simply a bent screw driver. You can get it from Ecklers for $10.00:
http://ecklers.com/product.asp?pf_id=A4300&dept_id=120
Good luck
https://www.corvetteforum.com/techti...D=67&TopicID=3
You will need a special tool which is simply a bent screw driver. You can get it from Ecklers for $10.00:
http://ecklers.com/product.asp?pf_id=A4300&dept_id=120
Good luck
