Fuel gage
Thread Starter
Advanced
Joined: Sep 2007
Posts: 91
Likes: 6
From: Ashville, New York
Fuel gage
After replacing my fuel sending unit, the gage level works fine but, when it gets down to 3/4 full, the needle wobbles back & forth. Was there any baffles in the original tank? Or what may be the problem. I bought this 82 only a year ago with 61,000 mi.
Jim
Jim
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,852
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
Jim,
The tank did not have any baffle in it. I've seen cars do this before and I don't know what will cause it. Maybe someone here has more to say about this so here is a bump.
Willcox
The tank did not have any baffle in it. I've seen cars do this before and I don't know what will cause it. Maybe someone here has more to say about this so here is a bump.
Willcox
Team Owner
Joined: Jan 2006
Posts: 37,637
Likes: 3,118
From: Crossville TN
Sounds like a 'worn' area on the variable resistor in the sender. It's just a little 'jumpy' at a certain spot. My suspicion is that the tank is frequently 3/4 full and it has more wear in that spot.
Thread Starter
Advanced
Joined: Sep 2007
Posts: 91
Likes: 6
From: Ashville, New York
fuel gage
I replaced the whole sending unit with a new one. As soon as it gets about 3/4 full until almost empty, it wobbles left & right with small bumps or any movement from the road etc.
Jim
Jim
